JLink and multiple nodes

This topic has 4 replies, 2 voices, and was last updated 8 years, 5 months ago by JohnWatl.

Log In Register Lost Password

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
April 10, 2018 at 21:01 #20668

JohnWatl
Participant

I have a target with 4 processors in a JTAG chain and am using JLink for the debug connection. Can arguments be added to the JLinkGDBSever command to target a particular device and byte offset? When using JLinkGDBServer the jtagconf argument would be added.

April 11, 2018 at 00:35 #20671

support
Keymaster

Yes, please use the solution described in this thread: https://sysprogs.com/w/forums/topic/configure-segger-j-link-to-target-specific-device-in-scan-chain/

April 11, 2018 at 17:27 #20680

JohnWatl
Participant

I’m not seeing the advanced option as shown on this page.

https://sysprogs.com/w/the-updated-visualgdb-embedded-debug-experience/

April 11, 2018 at 17:48 #20682

support
Keymaster

Hi,

You might be using an older VisualGDB version then. Please ensure you update to v5.3 (or v5.4 Preview) and also install the latest Segger package via VisualGDB Package Manager.

April 11, 2018 at 19:43 #20686

JohnWatl
Participant

The Segger package update makes advanced options available.
Author

Posts

Log In Register Lost Password

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.