[Sam a]

Hello,

After making a few driver changes the debugger seems to be functioning now, solved.

[Sam a]

Hi, I got my hands on an ESP-PROG for jtag debugging, when I switch to flash via jtagger vs com port, it cannot be detected for im assuming the same reason debugging would not work. However setting the port to COM15 for the jtagger in arduino allows me to program it, but through visualGDB I can’t seem to detect it. Is it because I am not supposed to be using OpenOCD with it? Or the script for the ESP-PROG does not exist?

As for the zadig usb drivers, I am not exactly sure what I would have to do there. When I first plugged in my ESP-PROG to my host machine it installed the drivers and I could see two new com ports, one I assume for receiving and I was indeed able to communicate with it.

 

EDIT: Using the ‘Program ESP32 Program into FLASH memory’ option I was just able to at least program the board using the ESP-PROG, however clicking ‘start’ to begin a debug session + flash does not work.

• This reply was modified 2 years, 6 months ago by Sam a.

[Sam a]

Also as for hardware I simply just have the ESP32 board mentioned above connected via usb to my host machine, with the SILABS cp210x windows drivers installed.

[Author]

Posts