[jenko_1080]

Sounds like an excellent plan, thanks for the help 🙂

[jenko_1080]

G’day Bazis,

I created a normal VisualGDB project for the STM32F407 with stdlib and copied some C++ code across- only classes that were separate from the core stm32f4xx packages.

And I did select Flash as the primary memory.
This problem occurs on both my main Pc and laptop.

This might help with a bit of diagnosis (though some config files may be missing):
https://bitbucket.org/jenko_1080/ele4epa
* Excuse some of the bad/rushed code, many mechanical hardware modifications caused delays as they always do with a university project.
I’m also having a separate problem that appears to be unrelated to the initial problem:
I run VisualGDB on my PC at home, and Laptop when I’m working elsewhere. The project I’m working on is sync’d using OneDrive to make life easier- and it has been until today. When I open the project and attempt to open “Project > VisualGDB  Project Properties” I get no window open.

The Fix i’m about to attempt is to create a new project and load my current classes in. If this fixes either problem I’ll report back, there are far too many things that can go wrong.
Both systems are running VS2013, PC is Win8 / Laptop is Win10.

[Author]

Posts