tumpa-lite JTAG OpenOCD driver issues Sysprogs forums › Forums › VisualGDB › tumpa-lite JTAG OpenOCD driver issues This topic contains 1 reply, has 2 voices, and was last updated by support 3 days, 18 hours ago. Log In Register Lost Password Viewing 2 posts - 1 through 2 (of 2 total) Author Posts November 24, 2022 at 16:49 #33469 felixcollinsParticipant I can not connect to my tumpalite jtag board to debug the esp32 I’m working on. The tumpa is visible in the device manager with the right pid/vid. Any ideas on how to proceed with fixing this? Attachments:You must be logged in to view attached files. November 24, 2022 at 16:53 #33471 supportKeymaster Hi, Yes, please try asking Espressif. The ESP32 OpenOCD fork is maintained by them and they might have an idea how to get it working. You can also try asking the JTAG programmer vendor. Author Posts Log In Register Lost Password Viewing 2 posts - 1 through 2 (of 2 total) You must be logged in to reply to this topic.