Kendryte file upload Sysprogs forums › Forums › VisualGDB › Kendryte file upload This topic contains 2 replies, has 2 voices, and was last updated by Johanan 1 month, 3 weeks ago. Log In Register Lost Password Viewing 3 posts - 1 through 3 (of 3 total) Author Posts November 24, 2020 at 07:46 #29576 JohananParticipant Kendryte JTAGwith OpenGDB is still not very stable. I wonder if we can have a short script that will use Kendryte kflush command line to upload the bin file directly from VS. I mean, compile/upload/run in one click. Thanks Johanan November 24, 2020 at 08:06 #29577 supportKeymaster Hi, This is already supported via Custom Shortcuts (requires Custom edition or higher). If you are using a lower edition, you can always upgrade your key here. November 24, 2020 at 09:37 #29582 JohananParticipant Well, as I am “eating stones” with JTAG, it would be really nice to have it with the embedded version 🙁 I hope this will be added. After all, once they get JTAG to work, this will not be needed… Author Posts Log In Register Lost Password Viewing 3 posts - 1 through 3 (of 3 total) You must be logged in to reply to this topic.