Developing Nordic nRF52 code with Visual Studio

Sysprogs forums › Forums › VisualGDB › Developing Nordic nRF52 code with Visual Studio

Log In Register Lost Password
Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • March 8, 2018 at 02:20 #20338
    apfel sine
    Participant

    I am following your article Developing Nordic nRF52 code with Visual Studio

    https://visualgdb.com/tutorials/arm/nrf51/nrf52/ .

    At step 5: Select a sample from the sample list, I noticed, that my screen does not show nRF52 Evaluation Board. It shows nRF5x Evaluation Board. Should I be concerned about this ?

    Attachments:
    You must be logged in to view attached files.
    March 8, 2018 at 02:25 #20340
    apfel sine
    Participant

    I apologize,  here is the correct screenshot attached.

    Attachments:
    You must be logged in to view attached files.
    March 8, 2018 at 05:21 #20342
    support
    Keymaster

    Hi,

    No worries, the exact text slightly varies between different BSP versions, so that should not be a problem. Picking the right board is important though as different boards have slightly different pinouts. Normally the board number is printed on a sticker on top of the MCU (nRF52-DK should be PCA10040).

    March 9, 2018 at 20:28 #20353
    apfel sine
    Participant

    Thank you for the tip.

  • Author
    Posts
Log In Register Lost Password
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.