ARM hardware registers display incorrectly

Sysprogs forums › Forums › VisualGDB › ARM hardware registers display incorrectly

Log In Register Lost Password
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • April 5, 2022 at 13:55 #32474
    Vscson
    Participant

    I am debugging a STM32L496 project.

    With hardware floating point enabled the hardware CPU registers after d3 all show a value of 0xx-2, making it impossible to see psp, primask, basepri, etc.

    Is there a setting to fix this?

    I am using Version 5.6R4 (build 4535) on Visual Studio Version 16.11.10

    Attachments:
    You must be logged in to view attached files.
    April 13, 2022 at 13:22 #32504
    support
    Keymaster

    Sorry for the delay. We have finally managed to reproduce the issue and it turns out it was caused by a race condition in the hardware register window initialization logic.

    We have fixed it in the following build: VisualGDB-5.6.104.4554.msi

  • Author
    Posts
Log In Register Lost Password
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.