Hi,

I understand the SIGINT and SIGTRAP signals are used for break all, but I don’t understand why I have to be informed about it by a dialog box every time when I press the break all button. When I tick the checkbox “Break when this exception type is thrown” nothing is changing and the dialog box is shown next time again.

For the first issue, there is a log:
C:SysGCCarm-eabibinarm-eabi-gdb.exe –interpreter mi C:ProjectsARMC++EmbeddedProject1EmbeddedProject1/Debug/EmbeddedProject1.elf
-list-features
=thread-group-added,id=”i1″
~”GNU gdb (GDB) 7.5.1n”
~”Copyright (C) 2012 Free Software Foundation, Inc.n”
~”License GPLv3+: GNU GPL version 3 or later nThis is free software: you are free to change and redistribute it.nThere is NO WARRANTY, to the extent permitted by law. Type “show copying”nand “show warranty” for details.n”
~”This GDB was configured as “–host=i686-pc-mingw32 –target=arm-eabi”.nFor bug reporting instructions, please see:n”
~”…n”
~”Reading symbols from C:\Projects\ARM\C++\EmbeddedProject1\EmbeddedProject1\Debug\EmbeddedProject1.elf…”
~”done.n”
^done,features=[“frozen-varobjs”,”pending-breakpoints”,”thread-info”,”data-read-memory-bytes”,”breakpoint-notifications”,”ada-task-info”]
-gdb-set stop-on-solib-events 1
^done
-data-list-register-names
^done,register-names=[“r0″,”r1″,”r2″,”r3″,”r4″,”r5″,”r6″,”r7″,”r8″,”r9″,”r10″,”r11″,”r12″,”sp”,”lr”,”pc”,”f0″,”f1″,”f2″,”f3″,”f4″,”f5″,”f6″,”f7″,”fps”,”cpsr”,””,””,””,””,””,””,””,””,””,””,””,””,””,””,””,””,””,””,””,””,””,””,””,””,””,””,””,””,””,””,””,””,””,””,””,””,””,””,””,””,””,””,””,””,””,””,””,””,””,””,””,””,””,””,””,””,””,””,””,””,””,””,””,””,””]
-gdb-set disassembly-flavor intel
^error,msg=”No symbol “disassembly” in current context.”
^error,msg=”No symbol “disassembly” in current context.”
-gdb-set print demangle off
^done
-gdb-version
~”GNU gdb (GDB) 7.5.1n”
~”Copyright (C) 2012 Free Software Foundation, Inc.n”
~”License GPLv3+: GNU GPL version 3 or later nThis is free software: you are free to change and redistribute it.nThere is NO WARRANTY, to the extent permitted by law. Type “show copying”nand “show warranty” for details.n”
~”This GDB was configured as “–host=i686-pc-mingw32 –target=arm-eabi”.nFor bug reporting instructions, please see:n”
~”.n”
^done
-break-insert -f main
^done,bkpt={number=”1″,type=”breakpoint”,disp=”keep”,enabled=”y”,addr=”0x0800072e”,func=”main()”,file=”LEDBlink.cpp”,fullname=”C:\Projects\ARM\C++\EmbeddedProject1\EmbeddedProject1\LEDBlink.cpp”,line=”15″,times=”0″,original-location=”main”}
target remote :3333
&”target remote :3333n”
~”Remote debugging using :3333n”
=thread-group-started,id=”i1″,pid=”42000″
=thread-created,id=”1″,group-id=”i1″
~”Reset_Handler () at C:/Users/Babel/AppData/Local/VisualGDB/EmbeddedBSPs/arm-eabi/com.sysprogs.arm.stm32/STM32F30xxx/startup_stm32f30x.c:204n”
~”204ttSCB->VTOR = (uint32_t)&g_pfnVectors;n”
*stopped,frame={addr=”0x080004ec”,func=”Reset_Handler”,args=[],file=”C:/Users/Babel/AppData/Local/VisualGDB/EmbeddedBSPs/arm-eabi/com.sysprogs.arm.stm32/STM32F30xxx/startup_stm32f30x.c”,fullname=”C:\Users\Babel\AppData\Local\VisualGDB\EmbeddedBSPs\arm-eabi\com.sysprogs.arm.stm32\STM32F30xxx\startup_stm32f30x.c”,line=”204″},thread-id=”1″,stopped-threads=”all”
^done
mon halt
&”mon haltn”
^done
^done
info shared
&”info sharedn”
~”No shared libraries loaded at this time.n”
^done
load
&”loadn”
~”Loading section .isr_vector, size 0x188 lma 0x8000000n”
+download,{section=”.isr_vector”,section-size=”392″,total-size=”22634″}
~”Loading section .text, size 0x614 lma 0x8000188n”
+download,{section=”.text”,section-size=”1556″,total-size=”22634″}
~”Loading section .init_array, size 0x4 lma 0x800079cn”
+download,{section=”.init_array”,section-size=”4″,total-size=”22634″}
~”Loading section .fini_array, size 0x4 lma 0x80007a0n”
+download,{section=”.fini_array”,section-size=”4″,total-size=”22634″}
~”Start address 0x80004ed, load size 1956n”
~”Transfer rate: 5 KB/sec, 489 bytes/write.n”
^done
mon reset init
&”mon reset initn”
@”target state: haltedn”
@”target halted due to debug-request, current mode: Thread n”
@”xPSR: 0x01000000 pc: 0x080004ec msp: 0x2000a000n”
^done
info target
&”info targetn”
~”Symbols from “C:\Projects\ARM\C++\EmbeddedProject1\EmbeddedProject1\Debug\EmbeddedProject1.elf”.n”
~”Remote serial target in gdb-specific protocol:n”
~”Debugging a target over a serial line.n”
~”tWhile running this, GDB does not access memory from…n”
~”Local exec file:n”
~”t`C:\Projects\ARM\C++\EmbeddedProject1\EmbeddedProject1\Debug\EmbeddedProject1.elf’, file type elf32-littlearm.n”
~”tEntry point: 0x80004ecn”
~”t0x08000000 – 0x08000188 is .isr_vectorn”
~”t0x08000188 – 0x0800079c is .textn”
~”t0x0800079c – 0x080007a0 is .init_arrayn”
~”t0x080007a0 – 0x080007a4 is .fini_arrayn”
~”t0x20000000 – 0x2000001c is .bssn”
^done
-exec-continue
~”Note: automatically using hardware breakpoints for read-only addresses.n”
^running
*running,thread-id=”all”
=breakpoint-modified,bkpt={number=”1″,type=”breakpoint”,disp=”keep”,enabled=”y”,addr=”0x0800072e”,func=”main()”,file=”LEDBlink.cpp”,fullname=”C:\\Projects\\ARM\\C++\\EmbeddedProject1\\EmbeddedProject1\\LEDBlink.cpp”,line=”15″,times=”1″,original-location=”main”}
*stopped,reason=”breakpoint-hit”,disp=”keep”,bkptno=”1″,frame={addr=”0x0800072e”,func=”main”,args=[],file=”LEDBlink.cpp”,fullname=”C:\Projects\ARM\C++\EmbeddedProject1\EmbeddedProject1\LEDBlink.cpp”,line=”15″},thread-id=”1″,stopped-threads=”all”
-break-delete 1
^done
-exec-continue
^running
*running,thread-id=”all”
*stopped,reason=”signal-received”,signal-name=”SIGINT”,signal-meaning=”Interrupt”,frame={addr=”0x0800071c”,func=”Delay”,args=[],file=”LEDBlink.cpp”,fullname=”C:\Projects\ARM\C++\EmbeddedProject1\EmbeddedProject1\LEDBlink.cpp”,line=”7″},thread-id=”1″,stopped-threads=”all”
-gdb-exit
^exit
=thread-group-exited,id=”i1″

Hi,

Thank you for solving my problem in the next release.

You’re right that I have not set any breakpoint. But I tick the checkbox “Support ‘step into new instance’ through breakpoint in: main”. I think it is the one -break-insert command in the log, but the program does not stop there.