Hi,

today i tried to Flash a ESP8266. First I used the RTOS examples, and I was able to Flash the Code and it worked.
But now I’m trying to use a Arduino Project, but without success. I cannot Flash the device. With the Arduino studio it works just perfectly. I tried using different presets, but withou success. I restarted my Computer and assigned another COM-Port, no success. I’m out if ideas… I could need some help. Thanks in advance!

VisualGDB Version: 5.4R12 build 3242
VS2019 Version 15.7.3

GDB Session:

VisualGDB is licensed to Martin Klein
-gdb-version
=thread-group-added,id="i1"
~"GNU gdb (GDB) 8.2.50.20180723-git\n"
~"Copyright (C) 2018 Free Software Foundation, Inc.\n"
~"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>\nThis is free software: you are free to change and redistribute it.\nThere is NO WARRANTY, to the extent permitted by law."
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
~"\nType \"show copying\" and \"show warranty\" for details.\n"
~"This GDB was configured as \"--host=i686-w64-mingw32 --target=xtensa-lx106-elf\".\n"
~"Type \"show configuration\" for configuration details.\n"
~"For bug reporting instructions, please see:\n"
~"<http://www.gnu.org/software/gdb/bugs/>.\n"
~"Find the GDB manual and other documentation resources online at:\n <http://www.gnu.org/software/gdb/documentation/>."
Find the GDB manual and other documentation resources online at:
<http://www.gnu.org/software/gdb/documentation/>.
~"\n\n"
~"For help, type \"help\".\n"
~"Type \"apropos word\" to search for commands related to \"word\"...\n"
~"Reading symbols from D:/Elektronik/Mikrocontroller/ArduinoProject2/Output/Generic_ESP8266_Module/Release/ArduinoProject2.ino.elf..."
~"done.\n"
~"GNU gdb (GDB) 8.2.50.20180723-git\n"
~"Copyright (C) 2018 Free Software Foundation, Inc.\n"
~"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>\nThis is free software: you are free to change and redistribute it.\nThere is NO WARRANTY, to the extent permitted by law."
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
~"\nType \"show copying\" and \"show warranty\" for details.\n"
~"This GDB was configured as \"--host=i686-w64-mingw32 --target=xtensa-lx106-elf\".\n"
~"Type \"show configuration\" for configuration details.\n"
~"For bug reporting instructions, please see:\n"
~"<http://www.gnu.org/software/gdb/bugs/>.\n"
~"Find the GDB manual and other documentation resources online at:\n <http://www.gnu.org/software/gdb/documentation/>."
Find the GDB manual and other documentation resources online at:
<http://www.gnu.org/software/gdb/documentation/>.
~"\n\n"
~"For help, type \"help\".\n"
~"Type \"apropos word\" to search for commands related to \"word\".\n"
^done
-list-features
^done,features=["frozen-varobjs","pending-breakpoints","thread-info","data-read-memory-bytes","breakpoint-notifications","ada-task-info","language-option","info-gdb-mi-command","undefined-command-error-code","exec-run-start-option"]
-gdb-set disassembly-flavor intel
^error,msg="No symbol \"disassembly\" in current context."
-gdb-set print demangle off
^done
-target-disconnect
^error,msg="You can't do that when your target is `exec'"
-gdb-exit
^exit
</code>

<code>
VisualGDB version: 5.4.112.3242
------------------ System.Exception ------------------
System.Exception: Failed to upload the compiled sketch
at g9.y.a(rt1 a)
at VisualGDB.Common_GUI.WPF.ItemizedProgressWindow.<>c__DisplayClass2_2`1.<RunAction>b__0()


Details:


C:\Users\darki\AppData\Local\Arduino15\packages\esp8266\tools\python\3.7.2-post1\python "C:\Users\darki\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.2/tools/upload.py" --chip esp8266 --port "COM4" --baud "115200" "" version --end --chip esp8266 --port "COM4" --baud "115200" "" write_flash 0x0 "D:\Elektronik\Mikrocontroller\ArduinoProject2\Output\Generic_ESP8266_Module\Release/ArduinoProject2.ino.bin" --end
usage: esptool [-h] [--chip {auto,esp8266,esp32}] [--port PORT] [--baud BAUD]
[--before {default_reset,no_reset,no_reset_no_sync}]
[--after {hard_reset,soft_reset,no_reset}] [--no-stub]
[--trace] [--override-vddsdio [{1.8V,1.9V,OFF}]]
{load_ram,dump_mem,read_mem,write_mem,write_flash,run,image_info,make_image,elf2image,read_mac,chip_id,flash_id,read_flash_status,write_flash_status,read_flash,verify_flash,erase_flash,erase_region,version}
...
esptool: error: argument operation: invalid choice: '' (choose from 'load_ram', 'dump_mem', 'read_mem', 'write_mem', 'write_flash', 'run', 'image_info', 'make_image', 'elf2image', 'read_mac', 'chip_id', 'flash_id', 'read_flash_status', 'write_flash_status', 'read_flash', 'verify_flash', 'erase_flash', 'erase_region', 'version')


• This topic was modified 5 years, 3 months ago by Dschadu.
• This topic was modified 5 years, 3 months ago by Dschadu.
• This topic was modified 5 years, 3 months ago by Dschadu.