[rapzak]

I have only added 2 by myself…

[rapzak]

Zadig also suports that, but JTAG was only working when they where set to winusb both…

solved by install correct FDTI driver and loaded VCP on channel 1 in device manager

ESP32 Wrover kit JTAG

/Kasper

[rapzak]

Hi,

I got it working… but it was some long way…

I have used the <span style=”font-family: Courier New;”>tumpa.cfg but i have also written some arround in it, maybe not nescesary…</span>

But first when i got it to work i needed to set both interfaces to winusb driver.

Then it was working but interface 1 could i not be used as serial port.

But after i updated/installed correct ftdi bus driver, if i remember correct i set both interfaces to winusb.

But in device manger for channel B in proberties/advanced tab i couls select load VCP.

Then i now can downlaod through JTAG and read debug info on UART trough interface 1 UART.

Next step is it seems not to stop on HW breakpoints.

/Kasper

[Author]

Posts