[makurasian]

It didn’t work.  Try it with a segger probe and you will see what’s going wrong.

Target device: LPC55S69JBD100_CM33_C0

The device is unknown.

And also it comes an error Toolchain test failed. Failed to link a test program: c:\SysGCC\arm-eabi\….

VisualgGDB version: 5.5.5.3597

• This reply was modified 4 years, 7 months ago by makurasian.

[makurasian]

Thank you for the information and the great support!

Yes, I also thought on this multicore problem and how to make a project with VisualGDB. Spontaneously I would make two project in one solution. One for core0 and one for core1. It would be great if you make  a short description how this can be done with VisualGDB, if you have corrected the importer.

Thanks again

Manfred

 

 

[makurasian]

https://mcuxpresso.nxp.com/download/d3fc1d0b9b66e4962bd98ef761930528

[makurasian]

The file size is over 20MB and is to large to sent. Build it be yourself or give me an other way to upload.

[makurasian]

Take the latest SDK e.g. “SDK_2.7.1_LPCXpresso55S69” and select USB. If you have done this every USB example doesn’t work e.g. “lpcxpresso55s69_host_suspend_resume_hid_mouse_freertos”.

I tried it also with SDK “SDK_2.6.3_LPCXpresso55S69” with similar results.

I always get the following erros:

Error: selected processor does not support requested special purpose register — `mrs r3,primask’

Error: selected processor does not support `cpsid i’ in ARM mode

 

 

[Author]

Posts