Forum Replies Created
Viewing 4 posts - 1 through 4 (of 4 total)
-
Posts
-
I pointed it out !!
In The Debug settings, there is a [Debugged device] select. Per default [Dual Flash bank] was selected. I switched to [Single FLASH bank] and like magic it works.
hmm – I don’t think so becaus I have MDK-KEIL running in the other side and it works great (also with the ST-Link) I just tried the funktion [Programmand run without debbuging] with the following log:
C:\MinGW\arm\bin\arm-none-eabi-gdb.exe --interpreter mi "D:\CraneSoft\Develop\Systec\Xemo-2020\VisualGDB\EmbeddedProject2\VisualGDB\Debug\EmbeddedProject2" C:\MinGW\arm\bin\arm-none-eabi-gdb.exe --interpreter mi "D:\CraneSoft\Develop\Systec\Xemo-2020\VisualGDB\EmbeddedProject2\VisualGDB\Debug\EmbeddedProject2" -gdb-version -gdb-version C:\MinGW\arm\bin\arm-none-eabi-gdb.exe: warning: Couldn't determine a path for the index cache directory. C:\MinGW\arm\bin\arm-none-eabi-gdb.exe: warning: Couldn't determine a path for the index cache directory. C:\MinGW\arm\bin\arm-none-eabi-gdb.exe: warning: Couldn't determine a path for the index cache directory. =thread-group-added,id="i1" =thread-group-added,id="i1" =thread-group-added,id="i1" ~"GNU gdb (GNU Tools for Arm Embedded Processors 8-2019-q3-update) 8.3.0.20190703-git\n" ~"GNU gdb (GNU Tools for Arm Embedded Processors 8-2019-q3-update) 8.3.0.20190703-git\n" ~"GNU gdb (GNU Tools for Arm Embedded Processors 8-2019-q3-update) 8.3.0.20190703-git\n" ~"Copyright (C) 2019 Free Software Foundation, Inc.\n" ~"Copyright (C) 2019 Free Software Foundation, Inc.\n" ~"Copyright (C) 2019 Free Software Foundation, Inc.\n" ~"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>\nThis is free software: you are free to change and redistribute it.\nThere is NO WARRANTY, to the extent permitted by law." ~"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>\nThis is free software: you are free to change and redistribute it.\nThere is NO WARRANTY, to the extent permitted by law." ~"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>\nThis is free software: you are free to change and redistribute it.\nThere is NO WARRANTY, to the extent permitted by law." ~"\nType \"show copying\" and \"show warranty\" for details.\n" ~"\nType \"show copying\" and \"show warranty\" for details.\n" ~"\nType \"show copying\" and \"show warranty\" for details.\n" ~"This GDB was configured as \"--host=i686-w64-mingw32 --target=arm-none-eabi\".\n" ~"This GDB was configured as \"--host=i686-w64-mingw32 --target=arm-none-eabi\".\n" ~"This GDB was configured as \"--host=i686-w64-mingw32 --target=arm-none-eabi\".\n" ~"Type \"show configuration\" for configuration details.\n" ~"Type \"show configuration\" for configuration details.\n" ~"Type \"show configuration\" for configuration details.\n" ~"For bug reporting instructions, please see:\n" ~"For bug reporting instructions, please see:\n" ~"For bug reporting instructions, please see:\n" ~"<http://www.gnu.org/software/gdb/bugs/>.\n" ~"<http://www.gnu.org/software/gdb/bugs/>.\n" ~"<http://www.gnu.org/software/gdb/bugs/>.\n" ~"Find the GDB manual and other documentation resources online at:\n <http://www.gnu.org/software/gdb/documentation/>." ~"Find the GDB manual and other documentation resources online at:\n <http://www.gnu.org/software/gdb/documentation/>." ~"Find the GDB manual and other documentation resources online at:\n <http://www.gnu.org/software/gdb/documentation/>." ~"\n\n" ~"\n\n" ~"\n\n" ~"For help, type \"help\".\n" ~"For help, type \"help\".\n" ~"For help, type \"help\".\n" ~"Type \"apropos word\" to search for commands related to \"word\"...\n" ~"Type \"apropos word\" to search for commands related to \"word\"...\n" ~"Type \"apropos word\" to search for commands related to \"word\"...\n" ~"Reading symbols from D:\\CraneSoft\\Develop\\Systec\\Xemo-2020\\VisualGDB\\EmbeddedProject2\\VisualGDB\\Debug\\EmbeddedProject2...\n" ~"Reading symbols from D:\\CraneSoft\\Develop\\Systec\\Xemo-2020\\VisualGDB\\EmbeddedProject2\\VisualGDB\\Debug\\EmbeddedProject2...\n" ~"Reading symbols from D:\\CraneSoft\\Develop\\Systec\\Xemo-2020\\VisualGDB\\EmbeddedProject2\\VisualGDB\\Debug\\EmbeddedProject2...\n" (gdb) ~"GNU gdb (GNU Tools for Arm Embedded Processors 8-2019-q3-update) 8.3.0.20190703-git\n" ~"GNU gdb (GNU Tools for Arm Embedded Processors 8-2019-q3-update) 8.3.0.20190703-git\n" ~"GNU gdb (GNU Tools for Arm Embedded Processors 8-2019-q3-update) 8.3.0.20190703-git\n" ~"Copyright (C) 2019 Free Software Foundation, Inc.\n" ~"Copyright (C) 2019 Free Software Foundation, Inc.\n" ~"Copyright (C) 2019 Free Software Foundation, Inc.\n" ~"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>\nThis is free software: you are free to change and redistribute it.\nThere is NO WARRANTY, to the extent permitted by law." ~"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>\nThis is free software: you are free to change and redistribute it.\nThere is NO WARRANTY, to the extent permitted by law." ~"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>\nThis is free software: you are free to change and redistribute it.\nThere is NO WARRANTY, to the extent permitted by law." ~"\nType \"show copying\" and \"show warranty\" for details.\n" ~"\nType \"show copying\" and \"show warranty\" for details.\n" ~"\nType \"show copying\" and \"show warranty\" for details.\n" ~"This GDB was configured as \"--host=i686-w64-mingw32 --target=arm-none-eabi\".\n" ~"This GDB was configured as \"--host=i686-w64-mingw32 --target=arm-none-eabi\".\n" ~"This GDB was configured as \"--host=i686-w64-mingw32 --target=arm-none-eabi\".\n" ~"Type \"show configuration\" for configuration details.\n" ~"Type \"show configuration\" for configuration details.\n" ~"Type \"show configuration\" for configuration details.\n" ~"For bug reporting instructions, please see:\n" ~"For bug reporting instructions, please see:\n" ~"For bug reporting instructions, please see:\n" ~"<http://www.gnu.org/software/gdb/bugs/>.\n" ~"<http://www.gnu.org/software/gdb/bugs/>.\n" ~"<http://www.gnu.org/software/gdb/bugs/>.\n" ~"Find the GDB manual and other documentation resources online at:\n <http://www.gnu.org/software/gdb/documentation/>." ~"Find the GDB manual and other documentation resources online at:\n <http://www.gnu.org/software/gdb/documentation/>." ~"Find the GDB manual and other documentation resources online at:\n <http://www.gnu.org/software/gdb/documentation/>." ~"\n\n" ~"\n\n" ~"\n\n" ~"For help, type \"help\".\n" ~"For help, type \"help\".\n" ~"For help, type \"help\".\n" ~"Type \"apropos word\" to search for commands related to \"word\".\n" ~"Type \"apropos word\" to search for commands related to \"word\".\n" ~"Type \"apropos word\" to search for commands related to \"word\".\n" ^done ^done ^done (gdb) -list-features -list-features ^done,features=["frozen-varobjs","pending-breakpoints","thread-info","data-read-memory-bytes","breakpoint-notifications","ada-task-info","language-option","info-gdb-mi-command","undefined-command-error-code","exec-run-start-option","data-disassemble-a-option"] ^done,features=["frozen-varobjs","pending-breakpoints","thread-info","data-read-memory-bytes","breakpoint-notifications","ada-task-info","language-option","info-gdb-mi-command","undefined-command-error-code","exec-run-start-option","data-disassemble-a-option"] ^done,features=["frozen-varobjs","pending-breakpoints","thread-info","data-read-memory-bytes","breakpoint-notifications","ada-task-info","language-option","info-gdb-mi-command","undefined-command-error-code","exec-run-start-option","data-disassemble-a-option"] (gdb) -gdb-set disassembly-flavor intel -gdb-set disassembly-flavor intel ^error,msg="No symbol \"disassembly\" in current context." ^error,msg="No symbol \"disassembly\" in current context." ^error,msg="No symbol \"disassembly\" in current context." (gdb) -gdb-set print demangle off -gdb-set print demangle off ^done ^done ^done (gdb) set remotetimeout 60 set remotetimeout 60 &"set remotetimeout 60\n" &"set remotetimeout 60\n" &"set remotetimeout 60\n" =cmd-param-changed,param="remotetimeout",value="60" =cmd-param-changed,param="remotetimeout",value="60" =cmd-param-changed,param="remotetimeout",value="60" ^done ^done ^done (gdb) target remote :60644 target remote :60644 &"target remote :60644\n" &"target remote :60644\n" &"target remote :60644\n" ~"Remote debugging using :60644\n" ~"Remote debugging using :60644\n" ~"Remote debugging using :60644\n" =thread-group-started,id="i1",pid="42000" =thread-group-started,id="i1",pid="42000" =thread-group-started,id="i1",pid="42000" =thread-created,id="1",group-id="i1" =thread-created,id="1",group-id="i1" =thread-created,id="1",group-id="i1" &"warning: Overlapping regions in memory map: ignoring\n" &"warning: Overlapping regions in memory map: ignoring\n" &"warning: Overlapping regions in memory map: ignoring\n" ~"0x080002ac in _stext ()\n" ~"0x080002ac in _stext ()\n" ~"0x080002ac in _stext ()\n" *stopped,frame={addr="0x080002ac",func="_stext",args=[],arch="armv7e-m"},thread-id="1",stopped-threads="all" *stopped,frame={addr="0x080002ac",func="_stext",args=[],arch="armv7e-m"},thread-id="1",stopped-threads="all" *stopped,frame={addr="0x080002ac",func="_stext",args=[],arch="armv7e-m"},thread-id="1",stopped-threads="all" ^done ^done ^done (gdb) info shared info shared &"info shared\n" &"info shared\n" &"info shared\n" ~"No shared libraries loaded at this time.\n" ~"No shared libraries loaded at this time.\n" ~"No shared libraries loaded at this time.\n" ^done ^done ^done (gdb) mon halt mon halt &"mon halt\n" &"mon halt\n" &"mon halt\n" ^done ^done ^done (gdb) mon reset init mon reset init &"mon reset init\n" &"mon reset init\n" &"mon reset init\n" @"target halted due to debug-request, current mode: Thread \n" @"target halted due to debug-request, current mode: Thread \n" @"target halted due to debug-request, current mode: Thread \n" @"xPSR: 0x01000000 pc: 0x080002ac msp: 0x20007d70\n" @"xPSR: 0x01000000 pc: 0x080002ac msp: 0x20007d70\n" @"xPSR: 0x01000000 pc: 0x080002ac msp: 0x20007d70\n" @"Stlink adapter speed set to 4000 kHz\n" @"Stlink adapter speed set to 4000 kHz\n" @"Stlink adapter speed set to 4000 kHz\n" ^done ^done ^done (gdb) mon report_flash_progress 1 mon report_flash_progress 1 &"mon report_flash_progress 1\n" &"mon report_flash_progress 1\n" &"mon report_flash_progress 1\n" @"Device: STM32H74x/75x\n" @"Device: STM32H74x/75x\n" @"Device: STM32H74x/75x\n" @"flash size probed value 128\n" @"flash size probed value 128\n" @"flash size probed value 128\n" @"STM32H flash size is 128kb, base address is 0x8000000\n" @"STM32H flash size is 128kb, base address is 0x8000000\n" @"STM32H flash size is 128kb, base address is 0x8000000\n" @"Device: STM32H74x/75x\n" @"Device: STM32H74x/75x\n" @"Device: STM32H74x/75x\n" @"flash size probed value 128\n" @"flash size probed value 128\n" @"flash size probed value 128\n" @"STM32H flash size is 128kb, base address is 0x8000000\n" @"STM32H flash size is 128kb, base address is 0x8000000\n" @"STM32H flash size is 128kb, base address is 0x8000000\n" @"flash_bank_summary:0x8000000|0x20000|stm32h7x.bank1.cpu0\n" @"flash_bank_summary:0x8000000|0x20000|stm32h7x.bank1.cpu0\n" @"flash_bank_summary:0x8000000|0x20000|stm32h7x.bank1.cpu0\n" @"flash_bank_summary:0x8000000|0x20000|stm32h7x.bank2.cpu0\n" @"flash_bank_summary:0x8000000|0x20000|stm32h7x.bank2.cpu0\n" @"flash_bank_summary:0x8000000|0x20000|stm32h7x.bank2.cpu0\n" @"FLASH progress reporting is now on\n" @"FLASH progress reporting is now on\n" @"FLASH progress reporting is now on\n" @"\n" @"\n" @"\n" @"\n" @"\n" @"\n" ^done ^done ^done (gdb) load load &"load\n" &"load\n" &"load\n" ~"Loading section .isr_vector, size 0x298 lma 0x8000000\n" ~"Loading section .isr_vector, size 0x298 lma 0x8000000\n" ~"Loading section .isr_vector, size 0x298 lma 0x8000000\n" +download,{section=".isr_vector",section-size="664",total-size="91820"} +download,{section=".isr_vector",section-size="664",total-size="91820"} +download,{section=".isr_vector",section-size="664",total-size="91820"} +download,{section=".isr_vector",section-sent="664",section-size="664",total-sent="664",total-size="91820"} +download,{section=".isr_vector",section-sent="664",section-size="664",total-sent="664",total-size="91820"} +download,{section=".isr_vector",section-sent="664",section-size="664",total-sent="664",total-size="91820"} ~"Loading section .text, size 0x14ac lma 0x8000298\n" ~"Loading section .text, size 0x14ac lma 0x8000298\n" ~"Loading section .text, size 0x14ac lma 0x8000298\n" +download,{section=".text",section-size="5292",total-size="91820"} +download,{section=".text",section-size="5292",total-size="91820"} +download,{section=".text",section-size="5292",total-size="91820"} ~"Loading section .init_array, size 0x4 lma 0x8001744\n" ~"Loading section .init_array, size 0x4 lma 0x8001744\n" ~"Loading section .init_array, size 0x4 lma 0x8001744\n" +download,{section=".init_array",section-size="4",total-size="91820"} +download,{section=".init_array",section-size="4",total-size="91820"} +download,{section=".init_array",section-size="4",total-size="91820"} ~"Loading section .fini_array, size 0x4 lma 0x8001748\n" ~"Loading section .fini_array, size 0x4 lma 0x8001748\n" ~"Loading section .fini_array, size 0x4 lma 0x8001748\n" +download,{section=".fini_array",section-size="4",total-size="91820"} +download,{section=".fini_array",section-size="4",total-size="91820"} +download,{section=".fini_array",section-size="4",total-size="91820"} ~"Loading section .data, size 0x10 lma 0x800174c\n" ~"Loading section .data, size 0x10 lma 0x800174c\n" ~"Loading section .data, size 0x10 lma 0x800174c\n" +download,{section=".data",section-size="16",total-size="91820"} +download,{section=".data",section-size="16",total-size="91820"} +download,{section=".data",section-size="16",total-size="91820"} ~"Start address 0x8000c80, load size 5980\n" ~"Start address 0x8000c80, load size 5980\n" ~"Start address 0x8000c80, load size 5980\n" ~"Transfer rate: 104 KB/sec, 1196 bytes/write.\n" ~"Transfer rate: 104 KB/sec, 1196 bytes/write.\n" ~"Transfer rate: 104 KB/sec, 1196 bytes/write.\n" ^done ^done ^done (gdb) compare-sections compare-sections &"compare-sections\n" &"compare-sections\n" &"compare-sections\n" ~"Section .isr_vector, range 0x8000000 -- 0x8000298: MIS-MATCHED!\n" ~"Section .isr_vector, range 0x8000000 -- 0x8000298: MIS-MATCHED!\n" ~"Section .isr_vector, range 0x8000000 -- 0x8000298: MIS-MATCHED!\n" ~"Section .text, range 0x8000298 -- 0x8001744: MIS-MATCHED!\n" ~"Section .text, range 0x8000298 -- 0x8001744: MIS-MATCHED!\n" ~"Section .text, range 0x8000298 -- 0x8001744: MIS-MATCHED!\n" ~"Section .init_array, range 0x8001744 -- 0x8001748: MIS-MATCHED!\n" ~"Section .init_array, range 0x8001744 -- 0x8001748: MIS-MATCHED!\n" ~"Section .init_array, range 0x8001744 -- 0x8001748: MIS-MATCHED!\n" ~"Section .fini_array, range 0x8001748 -- 0x800174c: MIS-MATCHED!\n" ~"Section .fini_array, range 0x8001748 -- 0x800174c: MIS-MATCHED!\n" ~"Section .fini_array, range 0x8001748 -- 0x800174c: MIS-MATCHED!\n" ~"Section .data, range 0x800174c -- 0x800175c: MIS-MATCHED!\n" ~"Section .data, range 0x800174c -- 0x800175c: MIS-MATCHED!\n" ~"Section .data, range 0x800174c -- 0x800175c: MIS-MATCHED!\n" &"warning: One or more sections of the target image does not match\nthe loaded file\n" &"warning: One or more sections of the target image does not match\nthe loaded file\n" &"warning: One or more sections of the target image does not match\nthe loaded file\n" &"\n" &"\n" &"\n" ^done ^done ^done (gdb)Your hint to stop after reset handler was great. The point is that the flash was not programmed!! And at the moment do not know how get the flash programmed. In Debug settings Programm FLASH memeory is set to always but nevetheless the FLASH is not erased neither programmed.
BTW when running in RAM it works fine.
Thanks for quick response.
Of course my first attempt was using the ST-link. Downloading seens to be OK, but the debugger dos not stop at main or at my breakpoint. When pressing [break al] there is no source available. The dissasemby windows shows be that the processor was running in the nirvana. Mayby sometink is worong with my project. Its a simple blinky template from your project wizzard.
Viewing 4 posts - 1 through 4 (of 4 total)