VGDB200 Sysprogs forums › Forums › VisualGDB › VGDB200 This topic has 1 reply, 2 voices, and was last updated 7 years, 10 months ago by support. Log In Register Lost Password Viewing 2 posts - 1 through 2 (of 2 total) Author Posts February 1, 2017 at 15:27 #10258 hfrmobileParticipant Got a new board (same Linux distro etc.) but getting the following error: VGDB200 File transfer errors detected. Try disabling on-the-fly TAR mode for this host in SSH Host Manager. Even when doing this I get the same error. Connecting to the Console via SSH works fine. This topic was modified 7 years, 10 months ago by hfrmobile. February 1, 2017 at 16:46 #10260 supportKeymaster Hi, Please try enabling the verbose mode via Tools->Options->VisualGDB->General and try building again using the TAR mode. The log should should which files failed to transfer. Most likely this is related to some sort of a file permission problem. Author Posts Log In Register Lost Password Viewing 2 posts - 1 through 2 (of 2 total) You must be logged in to reply to this topic. Log In Username: Password: Keep me signed in Log In