Failuer of OpenOCD

Sysprogs forums › Forums › VisualGDB › Failuer of OpenOCD

Log In Register Lost Password
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • March 17, 2018 at 20:24 #20454
    donvukovic
    Participant

    I have been trying to get OpenOCD working on VS_community and Visual GDB.

    After failing last Oct, I am trying again today.

    I have downloaded VS_Community, esp32-gcc5.2.0-r7.exe and  VisualGDB-5.3r8-trial and re-installed everything.

    I created the demo “HTTP Server”, it compiles with no errors.

    When I click Start Debugging (F5) it loads the file but actual debugging is not possible.

    I tried to bypass debugging and click “Program and Start without Debugging”

    This fails every time.

    I discovered that if I unplug the Olimex ARM-USB-OCD-H from my computer, the ESP32 HTTP Server will run.

    Making any changes to my source code, recompile I can not reload that file until I unplug the ESP32 board, the debugger and shut down VS_Community and restart everything, I may beable reload the newly compiled file.

    So, this is not a viable solution.

    I just wanted you to know.

    Don Vukovic

    303-818-3765

    March 18, 2018 at 01:32 #20457
    support
    Keymaster

    Hi,

    This looks like some sort of a wiring problem. Please double-check the power and reset connections and try using a different example (e.g. LEDBlink) to see the exact moment where the board starts/stops working.

  • Author
    Posts
Log In Register Lost Password
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.