Fail to link STM32F302-Nucleo with OpenOCD?

Sysprogs forums › Forums › VisualGDB › Fail to link STM32F302-Nucleo with OpenOCD?

Log In Register Lost Password
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • February 12, 2015 at 10:26 #6141
    Tension
    Participant

    Nucleo board includes a ST-Link V2-1.

    VS Output:

    Open On-Chip Debugger 0.8.0 (2014-05-02-12:11)
    Licensed under GNU GPL v2
    For bug reports, read
    http://openocd.sourceforge.net/doc/doxygen/bugs.html
    32
    Info : This adapter doesn’t support configurable speed
    Info : STLINK v2 JTAG v23 API v2 SWIM v7 VID 0x0483 PID 0x374B
    Info : using stlink api v2
    Info : Target voltage: 3.245850
    Info : stm32f3x.cpu: hardware has 6 breakpoints, 4 watchpoints
    target state: halted
    target halted due to debug-request, current mode: Thread
    xPSR: 0x01000000 pc: 0x080028e0 msp: 0x20000580
    Info : accepting ‘gdb’ connection from 3333
    Info : device id = 0x10016439
    Warn : Cannot identify target as a STM32 family.
    Error: auto_probe failed
    Error: Connect failed. Consider setting up a gdb-attach event for the target to prepare target for GDB connect, or use ‘gdb_memory_map disable’.
    Error: attempted ‘gdb’ connection rejected

    ___________

    Can you help me out.

    February 12, 2015 at 10:59 #6142
    Tension
    Participant

    Seems fine with OpenOCD-0.9.0-dev.

  • Author
    Posts
Log In Register Lost Password
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.