I Have been using VGDB with a Tumpa Lite board to work with an ESP32 Wroom Module on a custom board. Everything has been fine. Today I tried a custom partitions.csv in the sketches folder. Now I can’t program the ESP32 over JTAG anymore. I’ve taken the partitions.csv file back out and done a clean and rebuild. But it still fails. Does anyone know what might be stuck? In particular what does the message @”not enough working area available(requested 10433)\n” @”no working area available, can’t alloc space for stub code!\n” mean?  Is this space in the flash? Or in the PC memory? Or where?

Thanks,

Felix

mon program_esp "C:/Users/felix/AppData/Local/Arduino15/packages/esp32/hardware/esp32/1.0.6/tools/sdk/bin/bootloader_qio_80m.bin" 0x1000
&"mon program_esp \"C:/Users/felix/AppData/Local/Arduino15/packages/esp32/hardware/esp32/1.0.6/tools/sdk/bin/bootloader_qio_80m.bin\" 0x1000\n"
@"JTAG tap: esp32.cpu0 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)\n"
@"JTAG tap: esp32.cpu1 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)\n"
@"esp32.cpu0: Debug controller was reset.\n"
@"esp32.cpu0: Core was reset.\n"
@"esp32.cpu0: Target halted, PC=0x500000CF, debug_reason=00000000\n"
@"esp32.cpu0: Core was reset.\n"
@"esp32.cpu0: Target halted, PC=0x40000400, debug_reason=00000000\n"
@"esp32.cpu1: Debug controller was reset.\n"
@"esp32.cpu1: Core was reset.\n"
@"esp32.cpu1: Target halted, PC=0x40000400, debug_reason=00000000\n"
@"** Programming Started **\n"
@"timed out while waiting for target halted / 4 - 2\n"
@"esp32.cpu0: Target halted, PC=0x40090369, debug_reason=00000000\n"
@"xtensa_wait_algorithm: not halted 0, pc 0x40090369, ps 0x60025\n"
@"Failed to wait algorithm (-302)!\n"
@"Algorithm run failed (-302)!\n"
@"not enough working area available(requested 10433)\n"
@"no working area available, can't alloc space for stub code!\n"
@"not enough working area available(requested 10433)\n"
@"no working area available, can't alloc space for stub code!\n"
@"** Programming Finished **\n"
^done
mon program_esp "C:/Users/felix/source/Thor/fw-10320-sensor-hub-esp32-firmware/FW-10320-sensor-hub-esp32-FW/Output/ESP32_Dev_Module/Debug/FW-10320-Sensor-Hub-ESP32-FW.ino.bin" 0x10000
&"mon program_esp \"C:/Users/felix/source/Thor/fw-10320-sensor-hub-esp32-firmware/FW-10320-sensor-hub-esp32-FW/Output/ESP32_Dev_Module/Debug/FW-10320-Sensor-Hub-ESP32-FW.ino.bin\" 0x10000\n"
@"JTAG tap: esp32.cpu0 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)\n"
@"JTAG tap: esp32.cpu1 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)\n"
@"esp32.cpu0: Debug controller was reset.\n"
@"esp32.cpu0: Core was reset.\n"
@"esp32.cpu0: Target halted, PC=0x500000CF, debug_reason=00000000\n"
@"esp32.cpu0: Core was reset.\n"
@"esp32.cpu0: Target halted, PC=0x40000400, debug_reason=00000000\n"
@"esp32.cpu1: Debug controller was reset.\n"
@"esp32.cpu1: C