HAL
ETH_HandleTypeDef::DMAErrorCode is only used within HAL.
 
Symbols
loading...
Files
loading...
CodeScopeSTM32 Libraries and SamplesHALETH_HandleTypeDef::DMAErrorCode

ETH_HandleTypeDef::DMAErrorCode field

Holds the DMA Rx Tx Error code when a DMA AIS interrupt occurs This parameter can be a combination of ETH_DMA_Status_Flags

Syntax

__IO uint32_t DMAErrorCode;

References

LocationReferrerText
stm32f4xx_hal_eth.h:551
DMAErrorCode; /*!< Holds the DMA Rx Tx Error code when a DMA AIS interrupt occurs
stm32f4xx_hal_eth.c:994HAL_ETH_Transmit()
heth->DMAErrorCode = heth->Instance->DMASR;
stm32f4xx_hal_eth.c:1918HAL_ETH_IRQHandler()
heth->DMAErrorCode = READ_BIT(heth->Instance->DMASR, (ETH_DMASR_FBES | ETH_DMASR_TPS | ETH_DMASR_RPS));
stm32f4xx_hal_eth.c:1929HAL_ETH_IRQHandler()
heth->DMAErrorCode = READ_BIT(heth->Instance->DMASR, (ETH_DMASR_ETS | ETH_DMASR_RWTS |
stm32f4xx_hal_eth.c:2678HAL_ETH_GetDMAError()
return heth->DMAErrorCode;

Data Use

Functions writing ETH_HandleTypeDef::DMAErrorCode
Functions reading ETH_HandleTypeDef::DMAErrorCode
all items filtered out
ETH_HandleTypeDef::DMAErrorCode
all items filtered out
Type of ETH_HandleTypeDef::DMAErrorCode
ETH_HandleTypeDef::DMAErrorCode
uint32_t
all items filtered out