SpiHandle - syntax, references, description

References

Location	Referrer	Text
main.c:59		SPI_HandleTypeDef SpiHandle;
main.c:119	main()	SpiHandle.Instance = SPIx;
main.c:120	main()	SpiHandle.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_256;
main.c:121	main()	SpiHandle.Init.Direction = SPI_DIRECTION_2LINES;
main.c:122	main()	SpiHandle.Init.CLKPhase = SPI_PHASE_1EDGE;
main.c:123	main()	SpiHandle.Init.CLKPolarity = SPI_POLARITY_LOW;
main.c:124	main()	SpiHandle.Init.DataSize = SPI_DATASIZE_8BIT;
main.c:125	main()	SpiHandle.Init.FirstBit = SPI_FIRSTBIT_MSB;
main.c:126	main()	SpiHandle.Init.TIMode = SPI_TIMODE_DISABLE;
main.c:127	main()	SpiHandle.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
main.c:128	main()	SpiHandle.Init.CRCPolynomial = 7;
main.c:129	main()	SpiHandle.Init.NSS = SPI_NSS_SOFT;
main.c:132	main()	SpiHandle.Init.Mode = SPI_MODE_MASTER;
main.c:137	main()	if(HAL_SPI_Init(&SpiHandle) != HAL_OK)
main.c:177	main()	if(HAL_SPI_Transmit(&SpiHandle, paddrcmd, CMD_LENGTH, SPI_TIMEOUT_MAX) != HAL_OK)
main.c:187	main()	while(HAL_SPI_GetState(&SpiHandle) != HAL_SPI_STATE_READY)
main.c:194	main()	if(HAL_SPI_Receive(&SpiHandle, (uint8_t *)&ackbytes, sizeof(ackbytes), SPI_TIMEOUT_MAX) != HAL_OK)
main.c:198	main()	while(HAL_SPI_GetState(&SpiHandle) != HAL_SPI_STATE_READY)
main.c:207	main()	if(HAL_SPI_Receive(&SpiHandle, aRxBuffer, DATA_LENGTH, SPI_TIMEOUT_MAX) != HAL_OK)
main.c:211	main()	while(HAL_SPI_GetState(&SpiHandle) != HAL_SPI_STATE_READY)
main.c:218	main()	if(HAL_SPI_Transmit(&SpiHandle, (uint8_t *)&ackbytes, sizeof(ackbytes), SPI_TIMEOUT_MAX) != HAL_OK)
main.c:222	main()	while(HAL_SPI_GetState(&SpiHandle) != HAL_SPI_STATE_READY)
main.c:251	main()	if(HAL_SPI_Transmit(&SpiHandle, paddrcmd, CMD_LENGTH, SPI_TIMEOUT_MAX) != HAL_OK)
main.c:255	main()	while(HAL_SPI_GetState(&SpiHandle) != HAL_SPI_STATE_READY)
main.c:262	main()	if(HAL_SPI_Receive(&SpiHandle, (uint8_t *)&ackbytes, sizeof(ackbytes), SPI_TIMEOUT_MAX) != HAL_OK)
main.c:266	main()	while(HAL_SPI_GetState(&SpiHandle) != HAL_SPI_STATE_READY)
main.c:274	main()	if(HAL_SPI_Transmit(&SpiHandle, aTxMasterBuffer, DATA_LENGTH, SPI_TIMEOUT_MAX) != HAL_OK)
main.c:278	main()	while(HAL_SPI_GetState(&SpiHandle) != HAL_SPI_STATE_READY)
main.c:285	main()	if(HAL_SPI_Receive(&SpiHandle, (uint8_t *)&ackbytes, sizeof(ackbytes), SPI_TIMEOUT_MAX) != HAL_OK)
main.c:289	main()	while(HAL_SPI_GetState(&SpiHandle) != HAL_SPI_STATE_READY)
main.c:441	Master_Synchro()	if(HAL_SPI_TransmitReceive(&SpiHandle, (uint8_t )&txackbytes, (uint8_t )&rxackbytes, 1, HAL_MAX_DELAY) != HAL_OK)
main.c:445	Master_Synchro()	while(HAL_SPI_GetState(&SpiHandle) != HAL_SPI_STATE_READY)

Data Use

Functions reading SpiHandle

SpiHandle

main()

all items filtered out

Type of SpiHandle

SpiHandle

__SPI_HandleTypeDef

all items filtered out

SpiHandle variable

Syntax

References

Data Use