QSPIHandle - syntax, references, description

References

Location	Referrer	Text
main.c:46		QSPI_HandleTypeDef QSPIHandle;
stm32f4xx_it.c:37		extern QSPI_HandleTypeDef QSPIHandle;
main.c:94	main()	QSPIHandle.Instance = QUADSPI;
main.c:95	main()	HAL_QSPI_DeInit(&QSPIHandle);
main.c:97	main()	QSPIHandle.Init.ClockPrescaler = 0;
main.c:98	main()	QSPIHandle.Init.FifoThreshold = 4;
main.c:99	main()	QSPIHandle.Init.SampleShifting = QSPI_SAMPLE_SHIFTING_HALFCYCLE;
main.c:100	main()	QSPIHandle.Init.FlashSize = QSPI_FLASH_SIZE;
main.c:101	main()	QSPIHandle.Init.ChipSelectHighTime = QSPI_CS_HIGH_TIME_2_CYCLE;
main.c:102	main()	QSPIHandle.Init.ClockMode = QSPI_CLOCK_MODE_0;
main.c:103	main()	QSPIHandle.Init.FlashID = QSPI_FLASH_ID_1;
main.c:104	main()	QSPIHandle.Init.DualFlash = QSPI_DUALFLASH_DISABLE;
main.c:106	main()	if (HAL_QSPI_Init(&QSPIHandle) != HAL_OK)
main.c:136	main()	QSPI_WriteEnable(&QSPIHandle);
main.c:145	main()	if (HAL_QSPI_Command_IT(&QSPIHandle, &sCommand) != HAL_OK)
main.c:160	main()	QSPI_AutoPollingMemReady(&QSPIHandle);
main.c:206	main()	QSPI_WriteEnable(&QSPIHandle);
main.c:215	main()	if (HAL_QSPI_Command(&QSPIHandle, &sCommand, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
main.c:220	main()	if (HAL_QSPI_Transmit_DMA(&QSPIHandle, flash_addr) != HAL_OK)
main.c:237	main()	QSPI_AutoPollingMemReady(&QSPIHandle);
main.c:265	main()	QSPI_DummyCyclesCfg(&QSPIHandle);
main.c:273	main()	if (HAL_QSPI_MemoryMapped(&QSPIHandle, &sCommand, &sMemMappedCfg) != HAL_OK)
main.c:434	QSPI_WriteEnable()	if (HAL_QSPI_Command(&QSPIHandle, &sCommand, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
main.c:450	QSPI_WriteEnable()	if (HAL_QSPI_AutoPolling(&QSPIHandle, &sCommand, &sConfig, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
main.c:484	QSPI_AutoPollingMemReady()	if (HAL_QSPI_AutoPolling_IT(&QSPIHandle, &sCommand, &sConfig) != HAL_OK)
main.c:512	QSPI_DummyCyclesCfg()	if (HAL_QSPI_Command(&QSPIHandle, &sCommand, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
main.c:517	QSPI_DummyCyclesCfg()	if (HAL_QSPI_Receive(&QSPIHandle, &reg, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
main.c:523	QSPI_DummyCyclesCfg()	QSPI_WriteEnable(&QSPIHandle);
main.c:529	QSPI_DummyCyclesCfg()	if (HAL_QSPI_Command(&QSPIHandle, &sCommand, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
main.c:534	QSPI_DummyCyclesCfg()	if (HAL_QSPI_Transmit(&QSPIHandle, &reg, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
stm32f4xx_it.c:158	QUADSPI_IRQHandler()	HAL_QSPI_IRQHandler(&QSPIHandle);
stm32f4xx_it.c:168	DMA2_Stream7_IRQHandler()	HAL_DMA_IRQHandler(QSPIHandle.hdma);

Data Use

Functions reading QSPIHandle

QSPIHandle

main()

DMA2_Stream7_IRQHandler()

all items filtered out

Type of QSPIHandle

QSPIHandle

QSPI_HandleTypeDef

all items filtered out

QSPIHandle variable

Syntax

References

Data Use