Symbols

loading...

Files

loading...

CodeScopeSTM32 Libraries and SamplesFMC_SRAMhsram

hsram variable

Syntax

SRAM_HandleTypeDef hsram;

References

Location	Referrer	Text
main.c:38		SRAM_HandleTypeDef hsram;
main.c:85	main()	hsram.Instance = FMC_NORSRAM_DEVICE;
main.c:86	main()	hsram.Extended = FMC_NORSRAM_EXTENDED_DEVICE;
main.c:96	main()	hsram.Init.NSBank = FMC_NORSRAM_BANK2;
main.c:97	main()	hsram.Init.DataAddressMux = FMC_DATA_ADDRESS_MUX_DISABLE;
main.c:98	main()	hsram.Init.MemoryType = FMC_MEMORY_TYPE_SRAM;
main.c:99	main()	hsram.Init.MemoryDataWidth = SRAM_MEMORY_WIDTH;
main.c:100	main()	hsram.Init.BurstAccessMode = FMC_BURST_ACCESS_MODE_DISABLE;
main.c:101	main()	hsram.Init.WaitSignalPolarity = FMC_WAIT_SIGNAL_POLARITY_LOW;
main.c:102	main()	hsram.Init.WrapMode = FMC_WRAP_MODE_DISABLE;
main.c:103	main()	hsram.Init.WaitSignalActive = FMC_WAIT_TIMING_BEFORE_WS;
main.c:104	main()	hsram.Init.WriteOperation = FMC_WRITE_OPERATION_ENABLE;
main.c:105	main()	hsram.Init.WaitSignal = FMC_WAIT_SIGNAL_DISABLE;
main.c:106	main()	hsram.Init.ExtendedMode = FMC_EXTENDED_MODE_DISABLE;
main.c:107	main()	hsram.Init.AsynchronousWait = FMC_ASYNCHRONOUS_WAIT_DISABLE;
main.c:108	main()	hsram.Init.WriteBurst = FMC_WRITE_BURST_DISABLE;
main.c:109	main()	hsram.Init.ContinuousClock = SRAM_CONTINUOUS_CLOCK;
main.c:112	main()	if(HAL_SRAM_Init(&hsram, &SRAM_Timing, &SRAM_Timing) != HAL_OK)

Data Use

Functions reading hsram

hsram

all items filtered out

Type of hsram

hsram

SRAM_HandleTypeDef

all items filtered out