QSPIHandle - syntax, references, description

References

Location	Referrer	Text
main.c:45		QSPI_HandleTypeDef QSPIHandle;
stm32f4xx_it.c:37		extern QSPI_HandleTypeDef QSPIHandle;
main.c:90	main()	QSPIHandle.Instance = QUADSPI;
main.c:91	main()	HAL_QSPI_DeInit(&QSPIHandle);
main.c:93	main()	QSPIHandle.Init.ClockPrescaler = 1;
main.c:94	main()	QSPIHandle.Init.FifoThreshold = 4;
main.c:95	main()	QSPIHandle.Init.SampleShifting = QSPI_SAMPLE_SHIFTING_HALFCYCLE;
main.c:96	main()	QSPIHandle.Init.FlashSize = QSPI_FLASH_SIZE;
main.c:97	main()	QSPIHandle.Init.ChipSelectHighTime = QSPI_CS_HIGH_TIME_2_CYCLE;
main.c:98	main()	QSPIHandle.Init.ClockMode = QSPI_CLOCK_MODE_0;
main.c:100	main()	if (HAL_QSPI_Init(&QSPIHandle) != HAL_OK)
main.c:131	main()	QSPI_WriteEnable(&QSPIHandle);
main.c:140	main()	if (HAL_QSPI_Command_IT(&QSPIHandle, &sCommand) != HAL_OK)
main.c:155	main()	QSPI_AutoPollingMemReady(&QSPIHandle);
main.c:187	main()	QSPI_WriteEnable(&QSPIHandle);
main.c:196	main()	if (HAL_QSPI_Command(&QSPIHandle, &sCommand, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
main.c:201	main()	if (HAL_QSPI_Transmit_DMA(&QSPIHandle, flash_addr) != HAL_OK)
main.c:217	main()	QSPI_AutoPollingMemReady(&QSPIHandle);
main.c:245	main()	QSPI_DummyCyclesCfg(&QSPIHandle);
main.c:253	main()	if (HAL_QSPI_MemoryMapped(&QSPIHandle, &sCommand, &sMemMappedCfg) != HAL_OK)
main.c:421	QSPI_WriteEnable()	if (HAL_QSPI_Command(&QSPIHandle, &sCommand, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
main.c:437	QSPI_WriteEnable()	if (HAL_QSPI_AutoPolling(&QSPIHandle, &sCommand, &sConfig, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
main.c:471	QSPI_AutoPollingMemReady()	if (HAL_QSPI_AutoPolling_IT(&QSPIHandle, &sCommand, &sConfig) != HAL_OK)
main.c:499	QSPI_DummyCyclesCfg()	if (HAL_QSPI_Command(&QSPIHandle, &sCommand, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
main.c:504	QSPI_DummyCyclesCfg()	if (HAL_QSPI_Receive(&QSPIHandle, &reg, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
main.c:510	QSPI_DummyCyclesCfg()	QSPI_WriteEnable(&QSPIHandle);
main.c:516	QSPI_DummyCyclesCfg()	if (HAL_QSPI_Command(&QSPIHandle, &sCommand, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
main.c:521	QSPI_DummyCyclesCfg()	if (HAL_QSPI_Transmit(&QSPIHandle, &reg, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
stm32f4xx_it.c:158	QUADSPI_IRQHandler()	HAL_QSPI_IRQHandler(&QSPIHandle);
stm32f4xx_it.c:168	DMA2_Stream7_IRQHandler()	HAL_DMA_IRQHandler(QSPIHandle.hdma);

Data Use

Functions reading QSPIHandle

QSPIHandle

main()

DMA2_Stream7_IRQHandler()

all items filtered out

Type of QSPIHandle

QSPIHandle

QSPI_HandleTypeDef

all items filtered out

QSPIHandle variable

Syntax

References

Data Use