HAL
LL_AHB3_GRP1_EnableClockLowPower() is only used within HAL.
 
Symbols
loading...
Files
loading...
CodeScopeSTM32 Libraries and SamplesHALLL_AHB3_GRP1_EnableClockLowPower()

LL_AHB3_GRP1_EnableClockLowPower() function

Enable AHB3 peripheral clocks in low-power mode AHB3LPENR FSMCLPEN LL_AHB3_GRP1_EnableClockLowPower\n AHB3LPENR QSPILPEN LL_AHB3_GRP1_EnableClockLowPower (*) value not defined in all devices.

Syntax

__STATIC_INLINE void LL_AHB3_GRP1_EnableClockLowPower(uint32_t Periphs);

Arguments

Periphs

This parameter can be a combination of the following values: @arg LL_AHB3_GRP1_PERIPH_FMC (*) @arg LL_AHB3_GRP1_PERIPH_FSMC (*) @arg LL_AHB3_GRP1_PERIPH_QSPI (*)

Return value

None

References

LocationText
stm32f4xx_ll_bus.h:1080
__STATIC_INLINE void LL_AHB3_GRP1_EnableClockLowPower(uint32_t Periphs)

Data Use

Data read by LL_AHB3_GRP1_EnableClockLowPower()
Data written by LL_AHB3_GRP1_EnableClockLowPower()
LL_AHB3_GRP1_EnableClockLowPower()::tmpreg
all items filtered out
LL_AHB3_GRP1_EnableClockLowPower()
LL_AHB3_GRP1_EnableClockLowPower()::tmpreg
all items filtered out
Type of LL_AHB3_GRP1_EnableClockLowPower()
LL_AHB3_GRP1_EnableClockLowPower()
uint32_t
all items filtered out