OpenOCD
stm8_common::num_hw_bpoints is only used within OpenOCD.
 
Symbols
loading...
Files
loading...
CodeScopeDevelopment ToolsOpenOCDstm8_common::num_hw_bpoints

stm8_common::num_hw_bpoints field

Syntax

uint8_t num_hw_bpoints;

References

LocationReferrerText
stm8.h:29
uint8_t num_hw_bpoints;
stm8.c:409stm8_configure_break_unit()
stm8->num_hw_bpoints = 2;
stm8.c:410stm8_configure_break_unit()
stm8->num_hw_bpoints_avail = stm8->num_hw_bpoints;
stm8.c:412stm8_configure_break_unit()
stm8->hw_break_list = calloc(stm8->num_hw_bpoints,
stm8.c:418stm8_configure_break_unit()
LOG_DEBUG("hw breakpoints: numinst %i numdata %i", stm8->num_hw_bpoints,
stm8.c:419stm8_configure_break_unit()
stm8->num_hw_bpoints);
stm8.c:1383stm8_set_breakpoint()
while (comparator_list[bp_num].used && (bp_num < stm8->num_hw_bpoints))
stm8.c:1385stm8_set_breakpoint()
if (bp_num >= stm8->num_hw_bpoints) {
stm8.c:1475stm8_unset_breakpoint()
if (bp_num >= stm8->num_hw_bpoints) {
stm8.c:1547stm8_set_watchpoint()
while (comparator_list[wp_num].used && (wp_num < stm8->num_hw_bpoints))
stm8.c:1549stm8_set_watchpoint()
if (wp_num >= stm8->num_hw_bpoints) {
stm8.c:1638stm8_unset_watchpoint()
if (wp_num >= stm8->num_hw_bpoints) {

Data Use

Functions writing stm8_common::num_hw_bpoints
Functions reading stm8_common::num_hw_bpoints
all items filtered out
stm8_common::num_hw_bpoints
all items filtered out
Type of stm8_common::num_hw_bpoints
stm8_common::num_hw_bpoints
uint8_t
all items filtered out