OpenOCD
stm32h7x_part_info::block_size is only used within OpenOCD.
 
Symbols
loading...
Files
loading...
CodeScopeDevelopment ToolsOpenOCDstm32h7x_part_info::block_size

stm32h7x_part_info::block_size field

Syntax

unsigned int block_size;

References

LocationReferrerText
stm32h7x.c:111
unsigned int block_size; /* flash write word size in bytes */
stm32h7x.c:171
.block_size = 32,
stm32h7x.c:186
.block_size = 16,
stm32h7x.c:201
.block_size = 32,
stm32h7x.c:563stm32x_write_block()
uint32_t data_size = 512 * stm32x_info->part_info->block_size;
stm32h7x.c:620stm32x_write_block()
buf_set_u32(reg_params[4].value, 0, 32, stm32x_info->part_info->block_size);
stm32h7x.c:626stm32x_write_block()
stm32x_info->part_info->block_size,
stm32h7x.c:684stm32x_write()
uint32_t blocks_remaining = count / stm32x_info->part_info->block_size;
stm32h7x.c:696stm32x_write()
buffer += blocks_remaining * stm32x_info->part_info->block_size;
stm32h7x.c:697stm32x_write()
address += blocks_remaining * stm32x_info->part_info->block_size;
stm32h7x.c:719stm32x_write()
retval = target_write_buffer(target, address, stm32x_info->part_info->block_size, buffer);
stm32h7x.c:727stm32x_write()
buffer += stm32x_info->part_info->block_size;
stm32h7x.c:728stm32x_write()
address += stm32x_info->part_info->block_size;
stm32h7x.c:874stm32x_probe()
bank->write_start_alignment = stm32x_info->part_info->block_size;
stm32h7x.c:875stm32x_probe()
bank->write_end_alignment = stm32x_info->part_info->block_size;

Data Use

Functions reading stm32h7x_part_info::block_size
stm32h7x_part_info::block_size
all items filtered out