OpenOCD
F_HAS_DUAL_BANK is only used within OpenOCD.
 
Symbols
loading...
Files
loading...
CodeScopeDevelopment ToolsOpenOCDF_HAS_DUAL_BANK

F_HAS_DUAL_BANK macro

Syntax

#define F_HAS_DUAL_BANK BIT(0)

References

LocationText
stm32l4x.c:138
#define F_HAS_DUAL_BANK BIT(0)
stm32l4x.c:393
.flags = F_HAS_DUAL_BANK,
stm32l4x.c:441
.flags = F_HAS_DUAL_BANK | F_QUAD_WORD_PROG | F_HAS_TZ | F_HAS_L5_FLASH_REGS,
stm32l4x.c:477
.flags = F_HAS_DUAL_BANK,
stm32l4x.c:525
.flags = F_HAS_DUAL_BANK,
stm32l4x.c:549
.flags = F_HAS_DUAL_BANK | F_USE_ALL_WRPXX,
stm32l4x.c:561
.flags = F_HAS_DUAL_BANK | F_USE_ALL_WRPXX,
stm32l4x.c:573
.flags = F_HAS_DUAL_BANK | F_USE_ALL_WRPXX,
stm32l4x.c:585
.flags = F_HAS_DUAL_BANK | F_USE_ALL_WRPXX | F_HAS_TZ | F_HAS_L5_FLASH_REGS,
stm32l4x.c:609
.flags = F_HAS_DUAL_BANK | F_QUAD_WORD_PROG | F_HAS_TZ | F_HAS_L5_FLASH_REGS,
stm32l4x.c:621
.flags = F_HAS_DUAL_BANK | F_QUAD_WORD_PROG | F_HAS_TZ | F_HAS_L5_FLASH_REGS,
stm32l4x.c:2216
if (stm32l4_info->part_info->flags & F_HAS_DUAL_BANK)
stm32l4x.c:2520
if (!(stm32l4_info->part_info->flags & F_HAS_DUAL_BANK)) {