Symbols

loading...

Files

loading...

CodeScopeSTM32 Libraries and SamplesADC_RegularConversion_DMAAdcHandle

AdcHandle variable

Syntax

from stm32f4xx_it.c:37

extern ADC_HandleTypeDef AdcHandle;

Implemented in main.c:36

References

Location	Referrer	Text
main.c:36		ADC_HandleTypeDef AdcHandle;
stm32f4xx_it.c:37		extern ADC_HandleTypeDef AdcHandle;
main.c:76	main()	AdcHandle.Instance = ADCx;
main.c:77	main()	AdcHandle.Init.ClockPrescaler = ADC_CLOCKPRESCALER_PCLK_DIV4;
main.c:78	main()	AdcHandle.Init.Resolution = ADC_RESOLUTION_12B;
main.c:79	main()	AdcHandle.Init.ScanConvMode = DISABLE; /* Sequencer disabled (ADC conversion on only 1 channel: channel set on rank 1) */
main.c:80	main()	AdcHandle.Init.ContinuousConvMode = ENABLE; /* Continuous mode disabled to have only 1 conversion at each conversion trig */
main.c:81	main()	AdcHandle.Init.DiscontinuousConvMode = DISABLE; /* Parameter discarded because sequencer is disabled */
main.c:82	main()	AdcHandle.Init.NbrOfDiscConversion = 0;
main.c:83	main()	AdcHandle.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE; /* Conversion start triggered at each external event */
main.c:84	main()	AdcHandle.Init.ExternalTrigConv = ADC_EXTERNALTRIGCONV_T1_CC1;
main.c:85	main()	AdcHandle.Init.DataAlign = ADC_DATAALIGN_RIGHT;
main.c:86	main()	AdcHandle.Init.NbrOfConversion = 1;
main.c:87	main()	AdcHandle.Init.DMAContinuousRequests = ENABLE;
main.c:88	main()	AdcHandle.Init.EOCSelection = DISABLE;
main.c:90	main()	if (HAL_ADC_Init(&AdcHandle) != HAL_OK)
main.c:102	main()	if (HAL_ADC_ConfigChannel(&AdcHandle, &sConfig) != HAL_OK)
main.c:113	main()	if(HAL_ADC_Start_DMA(&AdcHandle, (uint32_t*)&uhADCxConvertedValue, 1) != HAL_OK)
stm32f4xx_it.c:157	DMA2_Stream0_IRQHandler()	HAL_DMA_IRQHandler(AdcHandle.DMA_Handle);

Data Use

Functions reading AdcHandle

AdcHandle

DMA2_Stream0_IRQHandler()

all items filtered out

Type of AdcHandle

AdcHandle

ADC_HandleTypeDef

all items filtered out