1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
33
34
35
39
40
41
42
43
44
45
46
47
48
49
54
55
56
61
62
63
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
103
104
105
116
117
118
119
121
126
127
128
134
137
138
139
144
145
146
149
150
151
156
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
214
215
216
217
218
219
220
221
222
229
234
235
242
247
248
255
269
270
271
272
273
274
275
276
277
278
288
289
290
293
294
/* ... */
#include "main.h"
/* ... */
/* ... */
Includes
#define MASTER_BOARD
Private macro
SPI_HandleTypeDef SpiHandle;
uint8_t aTxBuffer[] = "****SPI - Two Boards communication based on Interrupt **** SPI Message ******** SPI Message ******** SPI Message ****";
uint8_t aRxBuffer[BUFFERSIZE];
Private variables
static void SystemClock_Config(void);
static void Error_Handler(void);
static uint16_t Buffercmp(uint8_t* pBuffer1, uint8_t* pBuffer2, uint16_t BufferLength);
Private function prototypes
/* ... */
int main(void)
{
/* ... */
HAL_Init();
BSP_LED_Init(LED3);
BSP_LED_Init(LED4);
SystemClock_Config();
SpiHandle.Instance = SPIx;
SpiHandle.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_32;
SpiHandle.Init.Direction = SPI_DIRECTION_2LINES;
SpiHandle.Init.CLKPhase = SPI_PHASE_1EDGE;
SpiHandle.Init.CLKPolarity = SPI_POLARITY_HIGH;
SpiHandle.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
SpiHandle.Init.CRCPolynomial = 7;
SpiHandle.Init.DataSize = SPI_DATASIZE_8BIT;
SpiHandle.Init.FirstBit = SPI_FIRSTBIT_MSB;
SpiHandle.Init.NSS = SPI_NSS_SOFT;
SpiHandle.Init.TIMode = SPI_TIMODE_DISABLE;
#ifdef MASTER_BOARD
SpiHandle.Init.Mode = SPI_MODE_MASTER;
#else
SpiHandle.Init.Mode = SPI_MODE_SLAVE;
#endif
if(HAL_SPI_Init(&SpiHandle) != HAL_OK)
{
Error_Handler();
}if (HAL_SPI_Init(&SpiHandle) != HAL_OK) { ... }
#ifdef MASTER_BOARD
BSP_PB_Init(BUTTON_KEY, BUTTON_MODE_GPIO);
while (BSP_PB_GetState(BUTTON_KEY) != 1)
{
BSP_LED_Toggle(LED3);
HAL_Delay(40);
}while (BSP_PB_GetState(BUTTON_KEY) != 1) { ... }
BSP_LED_Off(LED3);/* ... */
#endif
/* ... */
if(HAL_SPI_TransmitReceive_IT(&SpiHandle, (uint8_t*)aTxBuffer, (uint8_t *)aRxBuffer, BUFFERSIZE) != HAL_OK)
{
Error_Handler();
}if (HAL_SPI_TransmitReceive_IT(&SpiHandle, (uint8_t*)aTxBuffer, (uint8_t *)aRxBuffer, BUFFERSIZE) != HAL_OK) { ... }
/* ... */
while (HAL_SPI_GetState(&SpiHandle) != HAL_SPI_STATE_READY)
{
}while (HAL_SPI_GetState(&SpiHandle) != HAL_SPI_STATE_READY) { ... }
if(Buffercmp((uint8_t*)aTxBuffer, (uint8_t*)aRxBuffer, BUFFERSIZE))
{
Error_Handler();
}if (Buffercmp((uint8_t*)aTxBuffer, (uint8_t*)aRxBuffer, BUFFERSIZE)) { ... }
while (1)
{
}while (1) { ... }
}{ ... }
/* ... */
static void Error_Handler(void)
{
BSP_LED_On(LED4);
while(1)
{
}while (1) { ... }
}{ ... }
/* ... */
static void SystemClock_Config(void)
{
RCC_ClkInitTypeDef RCC_ClkInitStruct;
RCC_OscInitTypeDef RCC_OscInitStruct;
__HAL_RCC_PWR_CLK_ENABLE();
/* ... */
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
RCC_OscInitStruct.PLL.PLLM = 8;
RCC_OscInitStruct.PLL.PLLN = 360;
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
RCC_OscInitStruct.PLL.PLLQ = 7;
HAL_RCC_OscConfig(&RCC_OscInitStruct);
HAL_PWREx_EnableOverDrive();
/* ... */
RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4;
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2;
HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5);
}{ ... }
/* ... */
void HAL_SPI_TxRxCpltCallback(SPI_HandleTypeDef *hspi)
{
BSP_LED_On(LED3);
}{ ... }
/* ... */
void HAL_SPI_ErrorCallback(SPI_HandleTypeDef *hspi)
{
BSP_LED_On(LED4);
}{ ... }
/* ... */
static uint16_t Buffercmp(uint8_t* pBuffer1, uint8_t* pBuffer2, uint16_t BufferLength)
{
while (BufferLength--)
{
if((*pBuffer1) != *pBuffer2)
{
return BufferLength;
}if ((*pBuffer1) != *pBuffer2) { ... }
pBuffer1++;
pBuffer2++;
}while (BufferLength--) { ... }
return 0;
}{ ... }
#ifdef USE_FULL_ASSERT
/* ... */
void assert_failed(uint8_t* file, uint32_t line)
{
/* ... */
while (1)
{
}while (1) { ... }
}assert_failed (uint8_t* file, uint32_t line) { ... }
/* ... */#endif
/* ... */
/* ... */