SPI_FullDuplex_ComDMA
SpiHandle is only used within SPI_FullDuplex_ComDMA.
 
Symbols
loading...
Files
loading...
CodeScopeSTM32 Libraries and SamplesSPI_FullDuplex_ComDMASpiHandle

SpiHandle variable

Syntax

extern SPI_HandleTypeDef SpiHandle;
Implemented in main.c:47

References

LocationReferrerText
main.c:47
SPI_HandleTypeDef SpiHandle;
stm32f4xx_it.c:38
extern SPI_HandleTypeDef SpiHandle;
main.c:95main()
SpiHandle.Instance = SPIx;
main.c:96main()
SpiHandle.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_32;
main.c:97main()
SpiHandle.Init.Direction = SPI_DIRECTION_2LINES;
main.c:98main()
SpiHandle.Init.CLKPhase = SPI_PHASE_1EDGE;
main.c:99main()
SpiHandle.Init.CLKPolarity = SPI_POLARITY_LOW;
main.c:100main()
SpiHandle.Init.DataSize = SPI_DATASIZE_8BIT;
main.c:101main()
SpiHandle.Init.FirstBit = SPI_FIRSTBIT_MSB;
main.c:102main()
SpiHandle.Init.TIMode = SPI_TIMODE_DISABLE;
main.c:103main()
SpiHandle.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
main.c:104main()
SpiHandle.Init.CRCPolynomial = 7;
main.c:105main()
SpiHandle.Init.NSS = SPI_NSS_SOFT;
main.c:110main()
SpiHandle.Init.Mode = SPI_MODE_SLAVE;
main.c:113main()
if(HAL_SPI_Init(&SpiHandle) != HAL_OK)
main.c:134main()
if(HAL_SPI_TransmitReceive_DMA(&SpiHandle, (uint8_t*)aTxBuffer, (uint8_t *)aRxBuffer, BUFFERSIZE) != HAL_OK)
stm32f4xx_it.c:157DMA2_Stream2_IRQHandler()
HAL_DMA_IRQHandler(SpiHandle.hdmarx);
stm32f4xx_it.c:167DMA2_Stream3_IRQHandler()
HAL_DMA_IRQHandler(SpiHandle.hdmatx);
stm32f4xx_it.c:177SPI1_IRQHandler()
HAL_SPI_IRQHandler(&SpiHandle);

Data Use

Functions reading SpiHandle
SpiHandle
DMA2_Stream2_IRQHandler()
DMA2_Stream3_IRQHandler()
all items filtered out
Type of SpiHandle
SpiHandle
all items filtered out