Configure_I2C_Slave() function
This function configures I2C1 in Slave mode.
void Configure_I2C_Slave(void);
Return value
None
Notes
This function is used to : -1- Enables GPIO clock and configures the I2C1 pins. -2- Enable the I2C1 peripheral clock. -3- Configure NVIC for I2C1. -4- Configure I2C1 functional parameters. Peripheral configuration is minimal configuration from reset values. Thus, some useless LL unitary functions calls below are provided as commented examples - setting is default configuration from reset.
Functions calling Configure_I2C_Slave()
Functions called by Configure_I2C_Slave()
Configure_I2C_Slave()
Data read by Configure_I2C_Slave()
Configure_I2C_Slave()