hnor - syntax, references, description

References

Location	Referrer	Text
main.c:45		NOR_HandleTypeDef hnor;
main.c:101	main()	hnor.Instance = FMC_NORSRAM_DEVICE;
main.c:102	main()	hnor.Extended = FMC_NORSRAM_EXTENDED_DEVICE;
main.c:113	main()	hnor.Init.NSBank = FMC_NORSRAM_BANK1;
main.c:114	main()	hnor.Init.DataAddressMux = FMC_DATA_ADDRESS_MUX_DISABLE;
main.c:115	main()	hnor.Init.MemoryType = FMC_MEMORY_TYPE_NOR;
main.c:116	main()	hnor.Init.MemoryDataWidth = FMC_NORSRAM_MEM_BUS_WIDTH_16;
main.c:117	main()	hnor.Init.BurstAccessMode = FMC_BURST_ACCESS_MODE_DISABLE;
main.c:118	main()	hnor.Init.WaitSignalPolarity = FMC_WAIT_SIGNAL_POLARITY_LOW;
main.c:119	main()	hnor.Init.WrapMode = FMC_WRAP_MODE_DISABLE;
main.c:120	main()	hnor.Init.WaitSignalActive = FMC_WAIT_TIMING_BEFORE_WS;
main.c:121	main()	hnor.Init.WriteOperation = FMC_WRITE_OPERATION_ENABLE;
main.c:122	main()	hnor.Init.WaitSignal = FMC_WAIT_SIGNAL_DISABLE;
main.c:123	main()	hnor.Init.ExtendedMode = FMC_EXTENDED_MODE_DISABLE;
main.c:124	main()	hnor.Init.AsynchronousWait = FMC_ASYNCHRONOUS_WAIT_DISABLE;
main.c:125	main()	hnor.Init.WriteBurst = FMC_WRITE_BURST_DISABLE;
main.c:128	main()	if(HAL_NOR_Init(&hnor, &NOR_Timing, &NOR_Timing) != HAL_OK)
main.c:135	main()	if(HAL_NOR_Read_ID(&hnor, &NOR_Id) != HAL_OK)
main.c:152	main()	HAL_NOR_ReturnToReadMode(&hnor);
main.c:155	main()	HAL_NOR_Erase_Block(&hnor, WRITE_READ_ADDR, NOR_BANK_ADDR);
main.c:158	main()	if(HAL_NOR_GetStatus(&hnor, NOR_BANK_ADDR, NOR_TIMEOUT_VALUE) != HAL_NOR_STATUS_SUCCESS)
main.c:175	main()	HAL_NOR_Program(&hnor, (uint32_t *)startaddress, pdata);
main.c:178	main()	if(HAL_NOR_GetStatus(&hnor, NOR_BANK_ADDR, NOR_TIMEOUT_VALUE) != HAL_NOR_STATUS_SUCCESS)
main.c:190	main()	if(HAL_NOR_ReadBuffer(&hnor, NOR_BANK_ADDR + WRITE_READ_ADDR, aRxBuffer, BUFFER_SIZE) != HAL_OK)

Data Use

Functions reading hnor

hnor

main()

all items filtered out

Type of hnor

hnor

NOR_HandleTypeDef

all items filtered out

hnor variable

Syntax

References

Data Use