IAP_Main
NAK_TIMEOUT is only used within IAP_Main.
 
Symbols
loading...
Files
loading...
CodeScopeSTM32 Libraries and SamplesIAP_MainNAK_TIMEOUT

NAK_TIMEOUT macro

Syntax

#define NAK_TIMEOUT ((uint32_t)0x100000)

References

LocationText
ymodem.h:81
#define NAK_TIMEOUT ((uint32_t)0x100000)
ymodem.c:362
HAL_UART_Transmit(&UartHandle, &tmp, 1, NAK_TIMEOUT);
ymodem.c:363
HAL_UART_Transmit(&UartHandle, &tmp, 1, NAK_TIMEOUT);
ymodem.c:459
HAL_UART_Transmit(&UartHandle, &aPacketData[PACKET_START_INDEX], PACKET_SIZE + PACKET_HEADER_SIZE, NAK_TIMEOUT);
ymodem.c:472
if (HAL_UART_Receive(&UartHandle, &a_rx_ctrl[0], 1, NAK_TIMEOUT) == HAL_OK)
ymodem.c:480
if ((HAL_UART_Receive(&UartHandle, &a_rx_ctrl[0], 1, NAK_TIMEOUT) == HAL_OK) && (a_rx_ctrl[0] == CA))
ymodem.c:523
HAL_UART_Transmit(&UartHandle, &aPacketData[PACKET_START_INDEX], pkt_size + PACKET_HEADER_SIZE, NAK_TIMEOUT);
ymodem.c:536
if ((HAL_UART_Receive(&UartHandle, &a_rx_ctrl[0], 1, NAK_TIMEOUT) == HAL_OK) && (a_rx_ctrl[0] == ACK))
ymodem.c:580
if (HAL_UART_Receive(&UartHandle, &a_rx_ctrl[0], 1, NAK_TIMEOUT) == HAL_OK)
ymodem.c:588
if ((HAL_UART_Receive(&UartHandle, &a_rx_ctrl[0], 1, NAK_TIMEOUT) == HAL_OK) && (a_rx_ctrl[0] == CA))
ymodem.c:620
HAL_UART_Transmit(&UartHandle, &aPacketData[PACKET_START_INDEX], PACKET_SIZE + PACKET_HEADER_SIZE, NAK_TIMEOUT);
ymodem.c:633
if (HAL_UART_Receive(&UartHandle, &a_rx_ctrl[0], 1, NAK_TIMEOUT) == HAL_OK)