ADC_DualModeInterleaved
AdcHandle1 is only used within ADC_DualModeInterleaved.
 
Symbols
loading...
Files
loading...
CodeScopeSTM32 Libraries and SamplesADC_DualModeInterleavedAdcHandle1

AdcHandle1 variable

Syntax

extern ADC_HandleTypeDef AdcHandle1;
Implemented in main.c:37

References

LocationReferrerText
main.c:37
ADC_HandleTypeDef AdcHandle1;
stm32f4xx_it.c:39
extern ADC_HandleTypeDef AdcHandle1;
main.c:91main()
if(HAL_ADCEx_MultiModeStart_DMA(&AdcHandle1, (uint32_t*)&uhADCDualConvertedValue, 1) != HAL_OK)
main.c:240ADC_Config()
AdcHandle1.Instance = ADCx;
main.c:242ADC_Config()
AdcHandle1.Init.ClockPrescaler = ADC_CLOCKPRESCALER_PCLK_DIV4;
main.c:243ADC_Config()
AdcHandle1.Init.Resolution = ADC_RESOLUTION_8B;
main.c:244ADC_Config()
AdcHandle1.Init.ScanConvMode = DISABLE;
main.c:245ADC_Config()
AdcHandle1.Init.ContinuousConvMode = ENABLE;
main.c:246ADC_Config()
AdcHandle1.Init.DiscontinuousConvMode = DISABLE;
main.c:247ADC_Config()
AdcHandle1.Init.NbrOfDiscConversion = 0;
main.c:248ADC_Config()
AdcHandle1.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
main.c:249ADC_Config()
AdcHandle1.Init.ExternalTrigConv = ADC_EXTERNALTRIGCONV_T1_CC1;
main.c:250ADC_Config()
AdcHandle1.Init.DataAlign = ADC_DATAALIGN_RIGHT;
main.c:251ADC_Config()
AdcHandle1.Init.NbrOfConversion = 1;
main.c:252ADC_Config()
AdcHandle1.Init.DMAContinuousRequests = ENABLE;
main.c:253ADC_Config()
AdcHandle1.Init.EOCSelection = ENABLE;
main.c:255ADC_Config()
if(HAL_ADC_Init(&AdcHandle1) != HAL_OK)
main.c:262ADC_Config()
if(HAL_ADC_ConfigChannel(&AdcHandle1, &sConfig) != HAL_OK)
main.c:272ADC_Config()
if(HAL_ADCEx_MultiModeConfigChannel(&AdcHandle1, &mode) != HAL_OK)
stm32f4xx_it.c:160DMA2_Stream0_IRQHandler()
HAL_DMA_IRQHandler(AdcHandle1.DMA_Handle);

Data Use

Functions reading AdcHandle1
AdcHandle1
DMA2_Stream0_IRQHandler()
all items filtered out
Type of AdcHandle1
AdcHandle1
all items filtered out