Outline ![]()
Files ![]()
loading...
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
/**
******************************************************************************
* @file stm32f4xx_nucleo_144.h
* @author MCD Application Team
* @brief This file contains definitions for:
* - LEDs and push-button available on STM32F4XX-Nucleo-144 Kit
* from STMicroelectronics
* - LCD, joystick and microSD available on Adafruit 1.8" TFT LCD
* shield (reference ID 802)
******************************************************************************
* @attention
*
* Copyright (c) 2016 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4XX_NUCLEO_144_H
#define __STM32F4XX_NUCLEO_144_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal.h"
/* To be defined only if the board is provided with the related shield */
/* https://www.adafruit.com/products/802 */
#ifndef ADAFRUIT_TFT_JOY_SD_ID802
#define ADAFRUIT_TFT_JOY_SD_ID802
#endif
/** @addtogroup BSP
* @{
*/
/** @addtogroup STM32F4XX_NUCLEO_144
* @{
*/
/** @addtogroup STM32F4XX_NUCLEO_144_LOW_LEVEL
* @{
*/
/** @defgroup STM32F4XX_NUCLEO_144_LOW_LEVEL_Exported_Types STM32F4XX NUCLEO 144 LOW LEVEL Exported Types
* @{
*/
typedef enum
{
LED1 = 0,
LED_GREEN = LED1,
LED2 = 1,
LED_BLUE = LED2,
LED3 = 2,
LED_RED = LED3
}Led_TypeDef;
typedef enum
{
BUTTON_USER = 0,
/* Alias */
BUTTON_KEY = BUTTON_USER
}Button_TypeDef;
typedef enum
{
BUTTON_MODE_GPIO = 0,
BUTTON_MODE_EXTI = 1
}ButtonMode_TypeDef;
typedef enum
{
JOY_NONE = 0,
JOY_SEL = 1,
JOY_DOWN = 2,
JOY_LEFT = 3,
JOY_RIGHT = 4,
JOY_UP = 5
}JOYState_TypeDef;
/**
* @}
*/
/** @defgroup STM32F4XX_NUCLEO_144_LOW_LEVEL_Exported_Constants STM32F4XX NUCLEO 144 LOW LEVEL Exported Constants
* @{
*/
/**
* @brief Define for STM32F4XX_NUCLEO_144 board
*/
#if !defined (USE_STM32F4XX_NUCLEO_144)
#define USE_STM32F4XX_NUCLEO_144
#endif
/** @defgroup STM32F4XX_NUCLEO_144_LOW_LEVEL_LED STM32F4XX NUCLEO 144 LOW LEVEL LED
* @{
*/
#define LEDn 3
#define LED1_PIN GPIO_PIN_0
#define LED1_GPIO_PORT GPIOB
#define LED1_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE()
#define LED1_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE()
#define LED2_PIN GPIO_PIN_7
#define LED2_GPIO_PORT GPIOB
#define LED2_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE()
#define LED2_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE()
#define LED3_PIN GPIO_PIN_14
#define LED3_GPIO_PORT GPIOB
#define LED3_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE()
#define LED3_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE()
#define LEDx_GPIO_CLK_ENABLE(__INDEX__) do { if((__INDEX__) == 0) {__HAL_RCC_GPIOB_CLK_ENABLE();} else\
{__HAL_RCC_GPIOB_CLK_ENABLE(); }} while(0)
#define LEDx_GPIO_CLK_DISABLE(__INDEX__) do { if((__INDEX__) == 0) {__HAL_RCC_GPIOB_CLK_DISABLE();} else\
{__HAL_RCC_GPIOB_CLK_DISABLE(); }} while(0)
/**
* @}
*/
/** @defgroup STM32F4XX_NUCLEO_144_LOW_LEVEL_BUTTON STM32F4XX NUCLEO 144 LOW LEVEL BUTTON
* @{
*/
#define BUTTONn 1
/**
* @brief Key push-button
*/
#define USER_BUTTON_PIN GPIO_PIN_13
#define USER_BUTTON_GPIO_PORT GPIOC
#define USER_BUTTON_GPIO_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE()
#define USER_BUTTON_GPIO_CLK_DISABLE() __HAL_RCC_GPIOC_CLK_DISABLE()
#define USER_BUTTON_EXTI_LINE GPIO_PIN_13
#define USER_BUTTON_EXTI_IRQn EXTI15_10_IRQn
#define BUTTONx_GPIO_CLK_ENABLE(__INDEX__) USER_BUTTON_GPIO_CLK_ENABLE()
#define BUTTONx_GPIO_CLK_DISABLE(__INDEX__) USER_BUTTON_GPIO_CLK_DISABLE()
/* Aliases */
#define KEY_BUTTON_PIN USER_BUTTON_PIN
#define KEY_BUTTON_GPIO_PORT USER_BUTTON_GPIO_PORT
#define KEY_BUTTON_GPIO_CLK_ENABLE() USER_BUTTON_GPIO_CLK_ENABLE()
#define KEY_BUTTON_GPIO_CLK_DISABLE() USER_BUTTON_GPIO_CLK_DISABLE()
#define KEY_BUTTON_EXTI_LINE USER_BUTTON_EXTI_LINE
#define KEY_BUTTON_EXTI_IRQn USER_BUTTON_EXTI_IRQn
/**
* @brief OTG_FS1 OVER_CURRENT and POWER_SWITCH Pins definition
*/
#define OTG_FS1_OVER_CURRENT_PIN GPIO_PIN_7
#define OTG_FS1_OVER_CURRENT_PORT GPIOG
#define OTG_FS1_OVER_CURRENT_PORT_CLK_ENABLE() __HAL_RCC_GPIOG_CLK_ENABLE()
#define OTG_FS1_POWER_SWITCH_PIN GPIO_PIN_6
#define OTG_FS1_POWER_SWITCH_PORT GPIOG
#define OTG_FS1_POWER_SWITCH_PORT_CLK_ENABLE() __HAL_RCC_GPIOG_CLK_ENABLE()
/**
* @}
*/
/** @defgroup STM32F4XX_NUCLEO_144_LOW_LEVEL_BUS STM32F4XX NUCLEO 144 LOW LEVEL BUS
* @{
*/
/*############################### SPI_A #######################################*/
#ifdef HAL_SPI_MODULE_ENABLED
#define NUCLEO_SPIx SPI1
#define NUCLEO_SPIx_CLK_ENABLE() __HAL_RCC_SPI1_CLK_ENABLE()
#define NUCLEO_SPIx_SCK_AF GPIO_AF5_SPI1
#define NUCLEO_SPIx_SCK_GPIO_PORT GPIOA
#define NUCLEO_SPIx_SCK_PIN GPIO_PIN_5
#define NUCLEO_SPIx_SCK_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE()
#define NUCLEO_SPIx_SCK_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE()
#define NUCLEO_SPIx_MISO_MOSI_AF GPIO_AF5_SPI1
#define NUCLEO_SPIx_MISO_MOSI_GPIO_PORT GPIOA
#define NUCLEO_SPIx_MISO_MOSI_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE()
#define NUCLEO_SPIx_MISO_MOSI_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE()
#define NUCLEO_SPIx_MISO_PIN GPIO_PIN_6
#define NUCLEO_SPIx_MOSI_PIN GPIO_PIN_7
/* Maximum Timeout values for flags waiting loops. These timeout are not based
on accurate values, they just guarantee that the application will not remain
stuck if the SPI communication is corrupted.
You may modify these timeout values depending on CPU frequency and application
conditions (interrupts routines ...). */
#define NUCLEO_SPIx_TIMEOUT_MAX 1000
#define NUCLEO_SPIx_CS_GPIO_PORT GPIOD
#define NUCLEO_SPIx_CS_PIN GPIO_PIN_14
#define NUCLEO_SPIx_CS_GPIO_CLK_ENABLE() __HAL_RCC_GPIOD_CLK_ENABLE()
#define NUCLEO_SPIx_CS_GPIO_CLK_DISABLE() __HAL_RCC_GPIOD_CLK_DISABLE()
#define SPIx__CS_LOW() HAL_GPIO_WritePin(NUCLEO_SPIx_CS_GPIO_PORT, NUCLEO_SPIx_CS_PIN, GPIO_PIN_RESET)
#define SPIx__CS_HIGH() HAL_GPIO_WritePin(NUCLEO_SPIx_CS_GPIO_PORT, NUCLEO_SPIx_CS_PIN, GPIO_PIN_SET)
/**
* @brief SD Control Lines management
*/
#define SD_CS_LOW() HAL_GPIO_WritePin(SD_CS_GPIO_PORT, SD_CS_PIN, GPIO_PIN_RESET)
#define SD_CS_HIGH() HAL_GPIO_WritePin(SD_CS_GPIO_PORT, SD_CS_PIN, GPIO_PIN_SET)
/**
* @brief LCD Control Lines management
*/
#define LCD_CS_LOW() HAL_GPIO_WritePin(LCD_CS_GPIO_PORT, LCD_CS_PIN, GPIO_PIN_RESET)
#define LCD_CS_HIGH() HAL_GPIO_WritePin(LCD_CS_GPIO_PORT, LCD_CS_PIN, GPIO_PIN_SET)
#define LCD_DC_LOW() HAL_GPIO_WritePin(LCD_DC_GPIO_PORT, LCD_DC_PIN, GPIO_PIN_RESET)
#define LCD_DC_HIGH() HAL_GPIO_WritePin(LCD_DC_GPIO_PORT, LCD_DC_PIN, GPIO_PIN_SET)
/**
* @brief SD Control Interface pins (shield D4)
*/
#define SD_CS_PIN GPIO_PIN_14
#define SD_CS_GPIO_PORT GPIOF
#define SD_CS_GPIO_CLK_ENABLE() __HAL_RCC_GPIOF_CLK_ENABLE()
#define SD_CS_GPIO_CLK_DISABLE() __HAL_RCC_GPIOF_CLK_DISABLE()
/**
* @brief LCD Control Interface pins (shield D10)
*/
#define LCD_CS_PIN GPIO_PIN_14
#define LCD_CS_GPIO_PORT GPIOD
#define LCD_CS_GPIO_CLK_ENABLE() __HAL_RCC_GPIOD_CLK_ENABLE()
#define LCD_CS_GPIO_CLK_DISABLE() __HAL_RCC_GPIOD_CLK_DISABLE()
/**
* @brief LCD Data/Command Interface pins (shield D8)
*/
#define LCD_DC_PIN GPIO_PIN_12
#define LCD_DC_GPIO_PORT GPIOF
#define LCD_DC_GPIO_CLK_ENABLE() __HAL_RCC_GPIOF_CLK_ENABLE()
#define LCD_DC_GPIO_CLK_DISABLE() __HAL_RCC_GPIOF_CLK_DISABLE()
#endif /* HAL_SPI_MODULE_ENABLED */
/*################################ ADCx for Nucleo 144 board ######################################*/
/**
* @brief ADCx Interface pins
* used to detect motion of Joystick available on Adafruit 1.8" TFT shield
*/
/* For some Nucleo144 boards, Arduino UNO pin7 (A3) is connected to PF3 in others to PC01 */
#if defined(ADC3)
#define NUCLEO_ADCx ADC3
#define NUCLEO_ADCx_CLK_ENABLE() __HAL_RCC_ADC3_CLK_ENABLE()
#define NUCLEO_ADCx_CLK_DISABLE() __HAL_RCC_ADC3_CLK_DISABLE()
#define NUCLEO_ADCx_CHANNEL ADC_CHANNEL_9
#define NUCLEO_ADCx_GPIO_PORT GPIOF
#define NUCLEO_ADCx_GPIO_PIN GPIO_PIN_3
#define NUCLEO_ADCx_GPIO_CLK_ENABLE() __HAL_RCC_GPIOF_CLK_ENABLE()
#define NUCLEO_ADCx_GPIO_CLK_DISABLE() __HAL_RCC_GPIOF_CLK_DISABLE()
#else
#define NUCLEO_ADCx ADC1
#define NUCLEO_ADCx_CLK_ENABLE() __HAL_RCC_ADC1_CLK_ENABLE()
#define NUCLEO_ADCx_CLK_DISABLE() __HAL_RCC_ADC1_CLK_DISABLE()
#define NUCLEO_ADCx_CHANNEL ADC_CHANNEL_11
#define NUCLEO_ADCx_GPIO_PORT GPIOC
#define NUCLEO_ADCx_GPIO_PIN GPIO_PIN_1
#define NUCLEO_ADCx_GPIO_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE()
#define NUCLEO_ADCx_GPIO_CLK_DISABLE() __HAL_RCC_GPIOC_CLK_DISABLE()
#endif /* HAL_ADC_MODULE_ENABLED */
/**
* @}
*/
/**
* @}
*/
/** @defgroup STM32F4XX_NUCLEO_144_LOW_LEVEL_Exported_Macros STM32F4XX NUCLEO 144 LOW LEVEL Exported Macros
* @{
*/
/**
* @}
*/
/** @defgroup STM32F4XX_NUCLEO_144_LOW_LEVEL_Exported_Functions STM32F4XX NUCLEO 144 LOW LEVEL Exported Functions
* @{
*/
uint32_t BSP_GetVersion(void);
void BSP_LED_Init(Led_TypeDef Led);
void BSP_LED_DeInit(Led_TypeDef Led);
void BSP_LED_On(Led_TypeDef Led);
void BSP_LED_Off(Led_TypeDef Led);
void BSP_LED_Toggle(Led_TypeDef Led);
void BSP_PB_Init(Button_TypeDef Button, ButtonMode_TypeDef ButtonMode);
void BSP_PB_DeInit(Button_TypeDef Button);
uint32_t BSP_PB_GetState(Button_TypeDef Button);
#ifdef HAL_ADC_MODULE_ENABLED
uint8_t BSP_JOY_Init(void);
JOYState_TypeDef BSP_JOY_GetState(void);
void BSP_JOY_DeInit(void);
#endif /* HAL_ADC_MODULE_ENABLED */
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32F4XX_NUCLEO_144_H */