Outline ![]()
Files ![]()
loading...
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
/**
******************************************************************************
* @file stm32f4_discovery.h
* @author MCD Application Team
* @brief This file contains definitions for STM32F4-Discovery Kit's Leds and
* push-button hardware resources.
******************************************************************************
* @attention
*
* Copyright (c) 2017 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4_DISCOVERY_H
#define __STM32F4_DISCOVERY_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal.h"
/** @addtogroup BSP
* @{
*/
/** @addtogroup STM32F4_DISCOVERY
* @{
*/
/** @addtogroup STM32F4_DISCOVERY_LOW_LEVEL
* @{
*/
/** @defgroup STM32F4_DISCOVERY_LOW_LEVEL_Exported_Types STM32F4 DISCOVERY LOW LEVEL_Exported_Types
* @{
*/
typedef enum
{
LED4 = 0,
LED3 = 1,
LED5 = 2,
LED6 = 3
} Led_TypeDef;
typedef enum
{
BUTTON_KEY = 0,
} Button_TypeDef;
typedef enum
{
BUTTON_MODE_GPIO = 0,
BUTTON_MODE_EXTI = 1
} ButtonMode_TypeDef;
/**
* @}
*/
/** @defgroup STM32F4_DISCOVERY_LOW_LEVEL_Exported_Constants STM32F4 DISCOVERY LOW LEVEL Exported Constants
* @{
*/
/**
* @brief Define for STM32F4_DISCOVERY board
*/
#if !defined (USE_STM32F4_DISCO)
#define USE_STM32F4_DISCO
#endif
/** @defgroup STM32F4_DISCOVERY_LOW_LEVEL_LED STM32F4 DISCOVERY LOW LEVEL LED
* @{
*/
#define LEDn 4
#define LED4_PIN GPIO_PIN_12
#define LED4_GPIO_PORT GPIOD
#define LED4_GPIO_CLK_ENABLE() __HAL_RCC_GPIOD_CLK_ENABLE()
#define LED4_GPIO_CLK_DISABLE() __HAL_RCC_GPIOD_CLK_DISABLE()
#define LED3_PIN GPIO_PIN_13
#define LED3_GPIO_PORT GPIOD
#define LED3_GPIO_CLK_ENABLE() __HAL_RCC_GPIOD_CLK_ENABLE()
#define LED3_GPIO_CLK_DISABLE() __HAL_RCC_GPIOD_CLK_DISABLE()
#define LED5_PIN GPIO_PIN_14
#define LED5_GPIO_PORT GPIOD
#define LED5_GPIO_CLK_ENABLE() __HAL_RCC_GPIOD_CLK_ENABLE()
#define LED5_GPIO_CLK_DISABLE() __HAL_RCC_GPIOD_CLK_DISABLE()
#define LED6_PIN GPIO_PIN_15
#define LED6_GPIO_PORT GPIOD
#define LED6_GPIO_CLK_ENABLE() __HAL_RCC_GPIOD_CLK_ENABLE()
#define LED6_GPIO_CLK_DISABLE() __HAL_RCC_GPIOD_CLK_DISABLE()
#define LEDx_GPIO_CLK_ENABLE(__INDEX__) do{if((__INDEX__) == 0) LED4_GPIO_CLK_ENABLE(); else \
if((__INDEX__) == 1) LED3_GPIO_CLK_ENABLE(); else \
if((__INDEX__) == 2) LED5_GPIO_CLK_ENABLE(); else \
if((__INDEX__) == 3) LED6_GPIO_CLK_ENABLE(); \
}while(0)
#define LEDx_GPIO_CLK_DISABLE(__INDEX__) do{if((__INDEX__) == 0) LED4_GPIO_CLK_DISABLE(); else \
if((__INDEX__) == 1) LED3_GPIO_CLK_DISABLE(); else \
if((__INDEX__) == 2) LED5_GPIO_CLK_DISABLE(); else \
if((__INDEX__) == 3) LED6_GPIO_CLK_DISABLE(); \
}while(0)
/**
* @}
*/
/** @defgroup STM32F4_DISCOVERY_LOW_LEVEL_BUTTON STM32F4 DISCOVERY LOW LEVEL BUTTON
* @{
*/
#define BUTTONn 1
/**
* @brief Wakeup push-button
*/
#define KEY_BUTTON_PIN GPIO_PIN_0
#define KEY_BUTTON_GPIO_PORT GPIOA
#define KEY_BUTTON_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE()
#define KEY_BUTTON_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE()
#define KEY_BUTTON_EXTI_IRQn EXTI0_IRQn
#define BUTTONx_GPIO_CLK_ENABLE(__INDEX__) do{if((__INDEX__) == 0) KEY_BUTTON_GPIO_CLK_ENABLE(); \
}while(0)
#define BUTTONx_GPIO_CLK_DISABLE(__INDEX__) do{if((__INDEX__) == 0) KEY_BUTTON_GPIO_CLK_DISABLE(); \
}while(0)
/**
* @}
*/
/** @defgroup STM32F4_DISCOVERY_LOW_LEVEL_BUS STM32F4 DISCOVERY LOW LEVEL BUS
* @{
*/
/*############################### SPI1 #######################################*/
#define DISCOVERY_SPIx SPI1
#define DISCOVERY_SPIx_CLK_ENABLE() __HAL_RCC_SPI1_CLK_ENABLE()
#define DISCOVERY_SPIx_GPIO_PORT GPIOA /* GPIOA */
#define DISCOVERY_SPIx_AF GPIO_AF5_SPI1
#define DISCOVERY_SPIx_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE()
#define DISCOVERY_SPIx_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE()
#define DISCOVERY_SPIx_SCK_PIN GPIO_PIN_5 /* PA.05 */
#define DISCOVERY_SPIx_MISO_PIN GPIO_PIN_6 /* PA.06 */
#define DISCOVERY_SPIx_MOSI_PIN GPIO_PIN_7 /* PA.07 */
/* Maximum Timeout values for flags waiting loops. These timeouts are not based
on accurate values, they just guarantee that the application will not remain
stuck if the SPI communication is corrupted.
You may modify these timeout values depending on CPU frequency and application
conditions (interrupts routines ...). */
#define SPIx_TIMEOUT_MAX 0x1000 /*<! The value of the maximal timeout for BUS waiting loops */
/*############################# I2C1 #########################################*/
/* I2C clock speed configuration (in Hz) */
#ifndef BSP_I2C_SPEED
#define BSP_I2C_SPEED 100000
#endif /* BSP_I2C_SPEED */
/* I2C peripheral configuration defines (control interface of the audio codec) */
#define DISCOVERY_I2Cx I2C1
#define DISCOVERY_I2Cx_CLK_ENABLE() __HAL_RCC_I2C1_CLK_ENABLE()
#define DISCOVERY_I2Cx_SCL_SDA_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE()
#define DISCOVERY_I2Cx_SCL_SDA_AF GPIO_AF4_I2C1
#define DISCOVERY_I2Cx_SCL_SDA_GPIO_PORT GPIOB
#define DISCOVERY_I2Cx_SCL_PIN GPIO_PIN_6
#define DISCOVERY_I2Cx_SDA_PIN GPIO_PIN_9
#define DISCOVERY_I2Cx_FORCE_RESET() __HAL_RCC_I2C1_FORCE_RESET()
#define DISCOVERY_I2Cx_RELEASE_RESET() __HAL_RCC_I2C1_RELEASE_RESET()
/* I2C interrupt requests */
#define DISCOVERY_I2Cx_EV_IRQn I2C1_EV_IRQn
#define DISCOVERY_I2Cx_ER_IRQn I2C1_ER_IRQn
/* Maximum Timeout values for flags waiting loops. These timeouts are not based
on accurate values, they just guarantee that the application will not remain
stuck if the SPI communication is corrupted.
You may modify these timeout values depending on CPU frequency and application
conditions (interrupts routines ...). */
#define I2Cx_TIMEOUT_MAX 0x1000 /*<! The value of the maximal timeout for BUS waiting loops */
/*############################# ACCELEROMETER ################################*/
/* Read/Write command */
#define READWRITE_CMD ((uint8_t)0x80)
/* Multiple byte read/write command */
#define MULTIPLEBYTE_CMD ((uint8_t)0x40)
/* Dummy Byte Send by the SPI Master device in order to generate the Clock to the Slave device */
#define DUMMY_BYTE ((uint8_t)0x00)
/* Chip Select macro definition */
#define ACCELERO_CS_LOW() HAL_GPIO_WritePin(ACCELERO_CS_GPIO_PORT, ACCELERO_CS_PIN, GPIO_PIN_RESET)
#define ACCELERO_CS_HIGH() HAL_GPIO_WritePin(ACCELERO_CS_GPIO_PORT, ACCELERO_CS_PIN, GPIO_PIN_SET)
/**
* @brief ACCELEROMETER Interface pins
*/
#define ACCELERO_CS_PIN GPIO_PIN_3 /* PE.03 */
#define ACCELERO_CS_GPIO_PORT GPIOE /* GPIOE */
#define ACCELERO_CS_GPIO_CLK_ENABLE() __HAL_RCC_GPIOE_CLK_ENABLE()
#define ACCELERO_CS_GPIO_CLK_DISABLE() __HAL_RCC_GPIOE_CLK_DISABLE()
#define ACCELERO_INT_GPIO_PORT GPIOE /* GPIOE */
#define ACCELERO_INT_GPIO_CLK_ENABLE() __HAL_RCC_GPIOE_CLK_ENABLE()
#define ACCELERO_INT_GPIO_CLK_DISABLE() __HAL_RCC_GPIOE_CLK_DISABLE()
#define ACCELERO_INT1_PIN GPIO_PIN_0 /* PE.00 */
#define ACCELERO_INT1_EXTI_IRQn EXTI0_IRQn
#define ACCELERO_INT2_PIN GPIO_PIN_1 /* PE.01 */
#define ACCELERO_INT2_EXTI_IRQn EXTI1_IRQn
/**
* @}
*/
/*############################### AUDIO ######################################*/
/**
* @brief AUDIO I2C Interface pins
*/
#define AUDIO_I2C_ADDRESS 0x94
/* Audio Reset Pin definition */
#define AUDIO_RESET_GPIO_CLK_ENABLE() __HAL_RCC_GPIOD_CLK_ENABLE()
#define AUDIO_RESET_PIN GPIO_PIN_4
#define AUDIO_RESET_GPIO GPIOD
/**
* @}
*/
/** @defgroup STM32F4_DISCOVERY_LOW_LEVEL_Exported_Macros STM32F4 DISCOVERY LOW LEVEL Exported Macros
* @{
*/
/**
* @}
*/
/** @defgroup STM32F4_DISCOVERY_LOW_LEVEL_Exported_Functions STM32F4 DISCOVERY LOW LEVEL Exported Functions
* @{
*/
uint32_t BSP_GetVersion(void);
void BSP_LED_Init(Led_TypeDef Led);
void BSP_LED_On(Led_TypeDef Led);
void BSP_LED_Off(Led_TypeDef Led);
void BSP_LED_Toggle(Led_TypeDef Led);
void BSP_PB_Init(Button_TypeDef Button, ButtonMode_TypeDef Mode);
uint32_t BSP_PB_GetState(Button_TypeDef Button);
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32F4_DISCOVERY_H */