Outline ![]()
Files ![]()
loading...
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
/**
******************************************************************************
* @file stm32469i_discovery.h
* @author MCD Application Team
* @brief This file contains definitions for STM32469I-Discovery LEDs,
* push-buttons hardware resources.
******************************************************************************
* @attention
*
* Copyright (c) 2017 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* IMPORTANT: One of the following flags must be defined in the preprocessor */
/* options in order to select the target board revision: !!!!!!!!!! */
/* USE_STM32469I_DISCO_REVA */
/* USE_STM32469I_DISCO_REVB */
/* USE_STM32469I_DISCO_REVC */
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32469I_DISCOVERY_H
#define __STM32469I_DISCOVERY_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal.h"
/** @addtogroup BSP
* @{
*/
/** @addtogroup STM32469I_Discovery
* @{
*/
/** @addtogroup STM32469I_Discovery_LOW_LEVEL
* @{
*/
/** @defgroup STM32469I_Discovery_LOW_LEVEL_Exported_Types STM32469I Discovery LOW LEVEL Exported Types
* @{
*/
/** @brief Led_TypeDef
* STM32469I_Discovery board leds definitions.
*/
typedef enum
{
LED1 = 0,
LED_GREEN = LED1,
LED2 = 1,
LED_ORANGE = LED2,
LED3 = 2,
LED_RED = LED3,
LED4 = 3,
LED_BLUE = LED4
} Led_TypeDef;
/** @brief Button_TypeDef
* STM32469I_Discovery board Buttons definitions.
*/
typedef enum
{
BUTTON_WAKEUP = 0
} Button_TypeDef;
#define BUTTON_USER BUTTON_WAKEUP
/** @brief ButtonMode_TypeDef
* STM32469I_Discovery board Buttons Modes definitions.
*/
typedef enum
{
BUTTON_MODE_GPIO = 0,
BUTTON_MODE_EXTI = 1
} ButtonMode_TypeDef;
/** @addtogroup Exported_types
* @{
*/
typedef enum
{
PB_SET = 0,
PB_RESET = !PB_SET
} ButtonValue_TypeDef;
/** @brief DISCO_Status_TypeDef
* STM32469I_DISCO board Status return possible values.
*/
typedef enum
{
DISCO_OK = 0,
DISCO_ERROR = 1
} DISCO_Status_TypeDef;
/**
* @}
*/
/**
* @}
*/
/** @defgroup STM32469I_Discovery_LOW_LEVEL_Exported_Constants STM32469I Discovery LOW LEVEL Exported Constants
* @{
*/
/** @defgroup STM32469I_Discovery_LOW_LEVEL_LED STM32469I Discovery LOW LEVEL LED
* @{
*/
/* Always four leds for all revisions of Discovery boards */
#define LEDn ((uint8_t)4)
/* 4 Leds are connected to MCU directly on PG6, PD4, PD5, PK3 */
#define LED1_GPIO_PORT ((GPIO_TypeDef*)GPIOG)
#define LED2_GPIO_PORT ((GPIO_TypeDef*)GPIOD)
#define LED3_GPIO_PORT ((GPIO_TypeDef*)GPIOD)
#define LED4_GPIO_PORT ((GPIO_TypeDef*)GPIOK)
#define LED1_GPIO_CLK_ENABLE() __HAL_RCC_GPIOG_CLK_ENABLE()
#define LED1_GPIO_CLK_DISABLE() __HAL_RCC_GPIOG_CLK_DISABLE()
#define LED2_GPIO_CLK_ENABLE() __HAL_RCC_GPIOD_CLK_ENABLE()
#define LED2_GPIO_CLK_DISABLE() __HAL_RCC_GPIOD_CLK_DISABLE()
#define LED3_GPIO_CLK_ENABLE() __HAL_RCC_GPIOD_CLK_ENABLE()
#define LED3_GPIO_CLK_DISABLE() __HAL_RCC_GPIOD_CLK_DISABLE()
#define LED4_GPIO_CLK_ENABLE() __HAL_RCC_GPIOK_CLK_ENABLE()
#define LED4_GPIO_CLK_DISABLE() __HAL_RCC_GPIOK_CLK_DISABLE()
#define LED1_PIN ((uint32_t)GPIO_PIN_6)
#define LED2_PIN ((uint32_t)GPIO_PIN_4)
#define LED3_PIN ((uint32_t)GPIO_PIN_5)
#define LED4_PIN ((uint32_t)GPIO_PIN_3)
/**
* @}
*/
/** @addtogroup STM32469I_Discovery_LOW_LEVEL_BUTTON STM32469I Discovery LOW LEVEL BUTTON
* @{
*/
/* Only one User/Wakeup button */
#define BUTTONn ((uint8_t)1)
/**
* @brief Wakeup push-button
*/
#define WAKEUP_BUTTON_PIN GPIO_PIN_0
#define WAKEUP_BUTTON_GPIO_PORT GPIOA
#define WAKEUP_BUTTON_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE()
#define WAKEUP_BUTTON_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE()
#define WAKEUP_BUTTON_EXTI_IRQn EXTI0_IRQn
/* Define the USER button as an alias of the Wakeup button */
#define USER_BUTTON_PIN WAKEUP_BUTTON_PIN
#define USER_BUTTON_GPIO_PORT WAKEUP_BUTTON_GPIO_PORT
#define USER_BUTTON_GPIO_CLK_ENABLE() WAKEUP_BUTTON_GPIO_CLK_ENABLE()
#define USER_BUTTON_GPIO_CLK_DISABLE() WAKEUP_BUTTON_GPIO_CLK_DISABLE()
#define USER_BUTTON_EXTI_IRQn WAKEUP_BUTTON_EXTI_IRQn
#define BUTTON_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE()
/**
* @}
*/
/**
* @brief OTG_FS1 OVER_CURRENT and POWER_SWITCH Pins definition
*/
#define AUDIO_INT_PIN GPIO_PIN_7
#define AUDIO_INT_PORT GPIOB
#define AUDIO_INT_PORT_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE()
#define OTG_FS1_OVER_CURRENT_PIN GPIO_PIN_7
#define OTG_FS1_OVER_CURRENT_PORT GPIOB
#define OTG_FS1_OVER_CURRENT_PORT_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE()
#define OTG_FS1_POWER_SWITCH_PIN GPIO_PIN_2
#define OTG_FS1_POWER_SWITCH_PORT GPIOB
#define OTG_FS1_POWER_SWITCH_PORT_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE()
/**
* @brief SD-detect signal
*/
#define SD_DETECT_PIN ((uint32_t)GPIO_PIN_2)
#define SD_DETECT_GPIO_PORT ((GPIO_TypeDef*)GPIOG)
#define SD_DETECT_GPIO_CLK_ENABLE() __HAL_RCC_GPIOG_CLK_ENABLE()
#define SD_DETECT_GPIO_CLK_DISABLE() __HAL_RCC_GPIOG_CLK_DISABLE()
#define SD_DETECT_EXTI_IRQn EXTI2_IRQn
/**
* @brief TS_INT signal from TouchScreen when it is configured in interrupt mode
*/
#define TS_INT_PIN ((uint32_t)GPIO_PIN_5)
#define TS_INT_GPIO_PORT ((GPIO_TypeDef*)GPIOJ)
#define TS_INT_GPIO_CLK_ENABLE() __HAL_RCC_GPIOJ_CLK_ENABLE()
#define TS_INT_GPIO_CLK_DISABLE() __HAL_RCC_GPIOJ_CLK_DISABLE()
#define TS_INT_EXTI_IRQn EXTI9_5_IRQn
/**
* @brief TouchScreen FT6206 Slave I2C address 1
*/
#define TS_I2C_ADDRESS ((uint16_t)0x54)
/**
* @brief TouchScreen FT6336G Slave I2C address 2
*/
#define TS_I2C_ADDRESS_A02 ((uint16_t)0x70)
/**
* @brief Audio I2C Slave address
*/
#define AUDIO_I2C_ADDRESS ((uint16_t)0x94)
/**
* @brief EEPROM I2C Slave address 1
*/
#define EEPROM_I2C_ADDRESS_A01 ((uint16_t)0xA0)
/**
* @brief EEPROM I2C Slave address 2
*/
#define EEPROM_I2C_ADDRESS_A02 ((uint16_t)0xA6)
/**
* @brief I2C clock speed configuration (in Hz)
* WARNING:
* Make sure that this define is not already declared in other files
* It can be used in parallel by other modules.
*/
#ifndef I2C1_SCL_FREQ_KHZ
#define I2C1_SCL_FREQ_KHZ 400000 /*!< f(I2C_SCL) = 400 kHz */
#endif /* I2C1_SCL_FREQ_KHZ */
/**
* @brief User can use this section to tailor I2C1/I2C1 instance used and associated
* resources.
* Definition for I2C1 clock resources
*/
#define DISCO_I2C1 I2C1
#define DISCO_I2C1_CLK_ENABLE() __HAL_RCC_I2C1_CLK_ENABLE()
#define DISCO_DMAx_CLK_ENABLE() __HAL_RCC_DMA1_CLK_ENABLE()
#define DISCO_I2C1_SCL_SDA_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE()
#define DISCO_I2C1_FORCE_RESET() __HAL_RCC_I2C1_FORCE_RESET()
#define DISCO_I2C1_RELEASE_RESET() __HAL_RCC_I2C1_RELEASE_RESET()
/** @brief Definition for I2C1 Pins
*/
#define DISCO_I2C1_SCL_PIN GPIO_PIN_8 /*!< PB8 */
#define DISCO_I2C1_SCL_SDA_GPIO_PORT GPIOB
#define DISCO_I2C1_SCL_SDA_AF GPIO_AF4_I2C1
#define DISCO_I2C1_SDA_PIN GPIO_PIN_9 /*!< PB9 */
/** @brief Definition of I2C interrupt requests
*/
#define DISCO_I2C1_EV_IRQn I2C1_EV_IRQn
#define DISCO_I2C1_ER_IRQn I2C1_ER_IRQn
/**
* @brief I2C2 clock speed configuration (in Hz)
* WARNING:
* Make sure that this define is not already declared in other files
* It can be used in parallel by other modules.
*/
#ifndef I2C2_SCL_FREQ_KHZ
#define I2C2_SCL_FREQ_KHZ 100000 /*!< f(I2C2_SCL) < 100 kHz */
#endif /* I2C2_SCL_FREQ_KHZ */
/**
* @brief User can use this section to tailor I2C2/I2C2 instance used and associated
* resources (audio codec).
* Definition for I2C2 clock resources
*/
#define DISCO_I2C2 I2C2
#define DISCO_I2C2_CLK_ENABLE() __HAL_RCC_I2C2_CLK_ENABLE()
#define DISCO_I2C2_SCL_SDA_GPIO_CLK_ENABLE() __HAL_RCC_GPIOH_CLK_ENABLE()
#define DISCO_I2C2_FORCE_RESET() __HAL_RCC_I2C2_FORCE_RESET()
#define DISCO_I2C2_RELEASE_RESET() __HAL_RCC_I2C2_RELEASE_RESET()
/** @brief Definition for I2C2 Pins
*/
#define DISCO_I2C2_SCL_PIN GPIO_PIN_4 /*!< PH4 */
#define DISCO_I2C2_SCL_SDA_GPIO_PORT GPIOH
#define DISCO_I2C2_SCL_SDA_AF GPIO_AF4_I2C2
#define DISCO_I2C2_SDA_PIN GPIO_PIN_5 /*!< PH5 */
/** @brief Definition of I2C2 interrupt requests
*/
#define DISCO_I2C2_EV_IRQn I2C2_EV_IRQn
#define DISCO_I2C2_ER_IRQn I2C2_ER_IRQn
#if !defined(USE_STM32469I_DISCO_REVA) && \
!defined(USE_STM32469I_DISCO_REVB) && \
!defined(USE_STM32469I_DISCO_REVC)
#define USE_STM32469I_DISCO_REVC
#endif
/**
* @}
*/
/** @defgroup STM32469I_Discovery_LOW_LEVEL_Exported_Macros STM32469I Discovery LOW LEVEL Exported Macros
* @{
*/
/**
* @}
*/
/** @defgroup STM32469I_Discovery_LOW_LEVEL_Exported_Functions STM32469I Discovery LOW LEVEL Exported Functions
* @{
*/
uint32_t BSP_GetVersion(void);
void BSP_LED_Init(Led_TypeDef Led);
void BSP_LED_DeInit(Led_TypeDef Led);
void BSP_LED_On(Led_TypeDef Led);
void BSP_LED_Off(Led_TypeDef Led);
void BSP_LED_Toggle(Led_TypeDef Led);
void BSP_PB_Init(Button_TypeDef Button, ButtonMode_TypeDef Button_Mode);
void BSP_PB_DeInit(Button_TypeDef Button);
uint32_t BSP_PB_GetState(Button_TypeDef Button);
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32469I_DISCOVERY_H */