OpenOCD
str9xpec_status_codes::STR9XPEC_ISC_SUCCESS is only used within OpenOCD.
 
Symbols
loading...
Files
loading...
CodeScopeDevelopment ToolsOpenOCDstr9xpec_status_codes::STR9XPEC_ISC_SUCCESS

str9xpec_status_codes::STR9XPEC_ISC_SUCCESS

Syntax

STR9XPEC_ISC_SUCCESS = 2;

References

LocationReferrerText
str9xpec.c:53
STR9XPEC_ISC_SUCCESS = 2,
str9xpec.c:352str9xpec_blank_check()
if ((status & ISC_STATUS_ERROR) != STR9XPEC_ISC_SUCCESS)
str9xpec.c:372str9xpec_protect_check()
if ((status & ISC_STATUS_ERROR) != STR9XPEC_ISC_SUCCESS)
str9xpec.c:443str9xpec_erase()
if ((status & ISC_STATUS_ERROR) != STR9XPEC_ISC_SUCCESS)
str9xpec.c:506str9xpec_protect()
if ((status & ISC_STATUS_ERROR) != STR9XPEC_ISC_SUCCESS)
str9xpec.c:530str9xpec_protect()
if ((status & ISC_STATUS_ERROR) != STR9XPEC_ISC_SUCCESS)
str9xpec.c:645str9xpec_write()
if ((status & ISC_STATUS_ERROR) != STR9XPEC_ISC_SUCCESS)
str9xpec.c:687str9xpec_write()
if ((status & ISC_STATUS_ERROR) != STR9XPEC_ISC_SUCCESS)
str9xpec.c:767str9xpec_handle_flash_options_read_command()
if ((status & ISC_STATUS_ERROR) != STR9XPEC_ISC_SUCCESS)
str9xpec.c:816str9xpec_write_options()
if ((status & ISC_STATUS_ERROR) != STR9XPEC_ISC_SUCCESS)
str9xpec.c:874str9xpec_handle_flash_options_write_command()
if ((status & ISC_STATUS_ERROR) != STR9XPEC_ISC_SUCCESS)
str9xpec.c:986str9xpec_handle_flash_lock_command()
if ((status & ISC_STATUS_ERROR) != STR9XPEC_ISC_SUCCESS)
str9xpec.c:1006str9xpec_handle_flash_unlock_command()
if ((status & ISC_STATUS_ERROR) != STR9XPEC_ISC_SUCCESS)

Data Use