OpenOCD
scan_type::SCAN_OUT is only used within OpenOCD.
 
Symbols
loading...
Files
loading...
CodeScopeDevelopment ToolsOpenOCDscan_type::SCAN_OUT

scan_type::SCAN_OUT

From host to device,

Syntax

SCAN_OUT = 2;

References

LocationReferrerText
commands.h:26
SCAN_OUT = 2,
commands.c:175jtag_scan_type()
type |= SCAN_OUT;
rlink.c:1077rlink_scan()
if (extra_bits && (type == SCAN_OUT)) {
rlink.c:1111rlink_scan()
dtc_queue_run_if_full(type == SCAN_IN ? 1 : 2, type != SCAN_OUT ? 1 : 0);
rlink.c:1125rlink_scan()
if (type != SCAN_OUT) {
rlink.c:1135rlink_scan()
if (type != SCAN_OUT) {
rlink.c:1153rlink_scan()
case SCAN_OUT:
rlink.c:1186rlink_scan()
if (extra_bits && (type != SCAN_OUT)) {
rlink.c:1235rlink_scan()
dtc_queue_run_if_full(1, type == SCAN_OUT ? 0 : 1);
rlink.c:1237rlink_scan()
if (type == SCAN_OUT) {
ulink.c:891ulink_append_scan_cmd()
case SCAN_OUT:
ulink.c:924ulink_append_scan_cmd()
if ((scan_type == SCAN_OUT) || (scan_type == SCAN_IO)) {
ulink.c:1485ulink_queue_scan()
if ((type == SCAN_OUT) || (type == SCAN_IO)) {
ulink.c:1830ulink_post_process_scan()
case SCAN_OUT:
usb_blaster.c:314ublast_reset()
out_value = ublast_build_out(SCAN_OUT);
usb_blaster.c:332ublast_clock_tms()
out = ublast_build_out(SCAN_OUT);
usb_blaster.c:344ublast_idle_clock()
uint8_t out = ublast_build_out(SCAN_OUT);
usb_blaster.c:370ublast_clock_tdi()
out = ublast_build_out(SCAN_OUT);
usb_blaster.c:396ublast_clock_tdi_flip_tms()
out = ublast_build_out(SCAN_OUT);
usb_blaster.c:402ublast_clock_tdi_flip_tms()
out = ublast_build_out(SCAN_OUT);
usb_blaster.c:681ublast_runtest()
ublast_queue_tdi(NULL, num_cycles, SCAN_OUT);
usb_blaster.c:688ublast_stableclocks()
ublast_queue_tdi(NULL, num_cycles, SCAN_OUT);
usb_blaster.c:749ublast_initial_wipeout()
out_value = ublast_build_out(SCAN_OUT);
usb_blaster.c:979ublast_handle_pin_command()
out_value = ublast_build_out(SCAN_OUT);
usbprog.c:277usbprog_scan()
case SCAN_OUT:

Data Use