OpenOCD
nand_device::bus_width is only used within OpenOCD.
 
Symbols
loading...
Files
loading...
CodeScopeDevelopment ToolsOpenOCDnand_device::bus_width

nand_device::bus_width field

Syntax

int bus_width;

References

LocationReferrerText
core.h:54
int bus_width;
core.c:304nand_probe()
nand->bus_width = 0;
core.c:332nand_probe()
if (nand->bus_width == 8) {
core.c:378nand_probe()
nand->bus_width = 16;
core.c:380nand_probe()
nand->bus_width = 8;
core.c:385nand_probe()
if (nand->bus_width == 8) {
core.c:479nand_probe()
nand->bus_width,
lpc3180.c:131lpc3180_init()
int bus_width = nand->bus_width ? nand->bus_width : 8;
lpc3180.c:153lpc3180_init()
nand->bus_width = bus_width;
lpc3180.c:381lpc3180_read_data()
if (nand->bus_width == 8) {
lpc3180.c:384lpc3180_read_data()
} else if (nand->bus_width == 16) {
lpc3180.c:397lpc3180_read_data()
if (nand->bus_width == 8) {
lpc3180.c:400lpc3180_read_data()
} else if (nand->bus_width == 16) {
lpc32xx.c:181lpc32xx_init()
int bus_width = nand->bus_width ? nand->bus_width : 8;
lpc32xx.c:199lpc32xx_init()
nand->bus_width = bus_width;
lpc32xx.c:544lpc32xx_read_data()
if (nand->bus_width == 8) {
lpc32xx.c:565lpc32xx_read_data()
if (nand->bus_width == 8) {
mx3.c:109imx31_init()
if (!nand->bus_width) {
mx3.c:110imx31_init()
nand->bus_width = (pcsr_register_content & 0x80000000) ? 16 : 8;
mx3.c:112imx31_init()
pcsr_register_content |= ((nand->bus_width == 16) ? 0x80000000 : 0x00000000);
mx3.c:156imx31_init()
if (nand->bus_width == 16) {
mx3.c:217imx31_read_data()
if (nand->bus_width == 16)
mxc.c:232mxc_init()
if (!nand->bus_width) {
mxc.c:234mxc_init()
nand->bus_width = (sreg_content & sel_16bit) ? 16 : 8;
mxc.c:237mxc_init()
sreg_content |= ((nand->bus_width == 16) ? sel_16bit : 0x00000000);
mxc.c:240mxc_init()
if (nand->bus_width == 16)
mxc.c:300mxc_read_data()
if (nand->bus_width == 16)
nuc910.c:175nuc910_nand_init()
int bus_width = nand->bus_width ? nand->bus_width : 8;
nuc910.c:189nuc910_nand_init()
nand->bus_width = bus_width;
tcl.c:36handle_nand_list_command()
p->page_size, p->bus_width,
tcl.c:92handle_nand_info_command()
p->bus_width,
tcl.c:533create_nand_device()
c->bus_width = 0;

Data Use