OpenOCD
lattice_family_e::LATTICE_ECP5 is only used within OpenOCD.
 
Symbols
loading...
Files
loading...
CodeScopeDevelopment ToolsOpenOCDlattice_family_e::LATTICE_ECP5

lattice_family_e::LATTICE_ECP5

Syntax

LATTICE_ECP5;

References

LocationReferrerText
lattice_bit.h:26
LATTICE_ECP5,
lattice.c:47
{0x21111043, 409, LATTICE_ECP5 /* "LAE5U-12F & LFE5U-12F" */},
lattice.c:48
{0x41111043, 409, LATTICE_ECP5 /* "LFE5U-25F" */},
lattice.c:49
{0x41112043, 510, LATTICE_ECP5 /* "LFE5U-45F" */},
lattice.c:50
{0x41113043, 750, LATTICE_ECP5 /* "LFE5U-85F" */},
lattice.c:51
{0x81111043, 409, LATTICE_ECP5 /* "LFE5UM5G-25F" */},
lattice.c:52
{0x81112043, 510, LATTICE_ECP5 /* "LFE5UM5G-45F" */},
lattice.c:53
{0x81113043, 750, LATTICE_ECP5 /* "LFE5UM5G-85F" */},
lattice.c:54
{0x01111043, 409, LATTICE_ECP5 /* "LAE5UM-25F" */},
lattice.c:55
{0x01112043, 510, LATTICE_ECP5 /* "LAE5UM-45F" */},
lattice.c:56
{0x01113043, 750, LATTICE_ECP5 /* "LAE5UM-85F" */},
lattice.c:179lattice_read_usercode()
else if (lattice_device->family == LATTICE_ECP5)
lattice.c:208lattice_write_usercode()
else if (lattice_device->family == LATTICE_ECP5)
lattice.c:224lattice_read_status_u32()
else if (lattice_device->family == LATTICE_ECP5)
lattice.c:304lattice_load_command()
case LATTICE_ECP5:
lattice.c:309lattice_load_command()
if (lattice_device->family == LATTICE_ECP5)
lattice.c:358lattice_connect_spi_to_jtag()
else if (pld_device_info->family == LATTICE_ECP5)
lattice.c:379lattice_disconnect_spi_from_jtag()
else if (pld_device_info->family == LATTICE_ECP5)
lattice.c:401lattice_get_stuff_bits()
else if (pld_device_info->family == LATTICE_ECP5)
lattice.c:440lattice_pld_create_command()
family = LATTICE_ECP5;
lattice.c:569lattice_read_status_command_handler()
const bool do_idle = lattice_device->family == LATTICE_ECP5;
lattice.c:599lattice_refresh_command_handler()
else if (lattice_device->family == LATTICE_ECP5)

Data Use