OpenOCD
tap_length is only used within OpenOCD.
 
Symbols
loading...
Files
loading...
CodeScopeDevelopment ToolsOpenOCDtap_length

tap_length variable

Syntax

static unsigned tap_length;

References

LocationReferrerText
jlink.c:1965
static unsigned tap_length;
jlink.c:1991jlink_tap_init()
tap_length = 0;
jlink.c:2003jlink_clock_data()
unsigned available_length = JLINK_TAP_BUFFER_SIZE - tap_length / 8;
jlink.c:2019jlink_clock_data()
buf_set_buf(out, out_offset, tdi_buffer, tap_length, scan_length);
jlink.c:2021jlink_clock_data()
buf_set_buf(tms_out, tms_offset, tms_buffer, tap_length, scan_length);
jlink.c:2024jlink_clock_data()
pending_scan_result->first = tap_length;
jlink.c:2031jlink_clock_data()
tap_length += scan_length;
jlink.c:2044jlink_flush()
if (!tap_length)
jlink.c:2048jlink_flush()
tap_length, jlink_last_state);
jlink.c:2051jlink_flush()
tap_length, jtag_command_version);
jlink.c:2075fill_buffer()
unsigned int tap_pos = tap_length;
jlink.c:2092jlink_queue_data_out()
bit_copy(tdi_buffer, tap_length, data, 0, len);
jlink.c:2097jlink_queue_data_out()
tap_length += len;
jlink.c:2105jlink_queue_data_in()
tap_length += len;
jlink.c:2177jlink_swd_run_queue()
ret = jaylink_swd_io(devh, tms_buffer, tdi_buffer, tdo_buffer, tap_length);
jlink.c:2219jlink_swd_queue_cmd()
if (tap_length + 46 + 8 + ap_delay_clk >= swd_buffer_size * 8 ||
jlink.c:2233jlink_swd_queue_cmd()
pending_scan_results_buffer[pending_scan_results_length].first = tap_length;

Data Use