OpenOCD
::ETM_PORT_8BIT is only used within OpenOCD.
 
Symbols
loading...
Files
loading...
CodeScopeDevelopment ToolsOpenOCD::ETM_PORT_8BIT

::ETM_PORT_8BIT

Syntax

ETM_PORT_8BIT = 0x10;

References

LocationReferrerText
etm.h:84
ETM_PORT_8BIT = 0x10,
etb.c:545etb_read_trace()
else if ((etm_ctx->control & ETM_PORT_WIDTH_MASK) == ETM_PORT_8BIT)
etb.c:591etb_read_trace()
} else if ((etm_ctx->control & ETM_PORT_WIDTH_MASK) == ETM_PORT_8BIT) {
etb.c:646etb_start_capture()
if ((etm_ctx->control & ETM_PORT_WIDTH_MASK) != ETM_PORT_8BIT) {
etm.c:727etmv1_next_packet()
} else if ((ctx->control & ETM_PORT_WIDTH_MASK) == ETM_PORT_8BIT) {
etm.c:1346handle_etm_config_command()
portmode |= ETM_PORT_8BIT;

Data Use

Functions using ::ETM_PORT_8BIT
::ETM_PORT_8BIT
all items filtered out